[THIN] Re: Terminal Services Printing
- From: "Mark CALLEJA" <Mark.CALLEJA@xxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 30 Jun 2004 09:28:45 +0800
have you tried resetting the spooler each day to reset the queues??
Just guessing....
HTH
Mk
Mark Calleja
Coordinator Network Systems
Network Systems
Dept Housing and Works
(08) 9222 4941
mark.calleja@xxxxxxxxxxxxx
"There are only 10 types of people in the world: Those who understand
binary, and those who don't"
>>> rlambert@xxxxxxxxxxxxxxx 30/06/2004 7:29:39 >>>
No guesses?
-----Original Message-----
From: Ryan Lambert
Sent: Tuesday, June 29, 2004 1:30 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Terminal Services Printing
Hi all.
Just a question regarding printing in plain Terminal Services.
When a printer port is created with a Neoware (maybe other?) devices
in
Terminal Services, it creates a TS00x: port, which maps it back to the
appropriate printer. Our client is complaining that every day or so
these ports seem to be getting switched up and printing out to the
wrong
printer. Even if they manually set them back to the correct port, the
issue happens again.
Has anyone heard of anything like this?
--
Ryan Lambert, MCP, CCA
Network Engineer
OnlyOne IS
1242 East 49th St.
Cleveland, OH 44114
Ph/Fax: 216-373-2757
http://www.onlyoneis.com/
http://www.myonlyone.com <http://www.myonlyone.com/> /
********************************************************
This weeks sponsor Emergent Online Thinssentials Utilities
Using the latest software, hardware, networking technologies, proven technical
expertise, proprietary software and best practices, EOL provides
custom-tailored solutions for each client?s mission and specific goals.
http://www.go-eol.com
**********************************************************
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm
Other related posts:
