Thanks for the reply. AT&T said 20-25kb for each voice circuit. 15 circuits, 20 max. Thank You ~Doug Rooney Sonoma Tilemakers IT Manager 7750 Bell Rd. Windsor Ca, 95492 (707) 837-8177 X211 (707) 837-9472 FAX it@xxxxxxxxxxxxxxxxxxxx From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Jan Sent: Friday, November 20, 2009 9:06 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Slightly OT: You will get less than 1.5Mbps. Each voice circuit will take from 56-64kb from the T1. That being said, a T1 tends to have less latency. We ran over 300 Simultaneous Citrix users over a T1 at one point. They had no issues. Jan On Fri, Nov 20, 2009 at 11:43 AM, Doug Rooney <Doug@xxxxxxxxxxxxxxxxxxxx> wrote: Hello, We are currently connected via DSL that I just tested at 2.4Mbps Down and 556Kbps up and we pay about $70 a month and we have a PRI for our phones. Well my AT&T rep is suggesting we convert the PRI to a IP Flex T1, our concern is the download speed going from 2.4Mbps to 1.5Mbps and some of that going to the phones. Anyone have any good info regarding this, how our users will be affected? We have about 30 users on this circuit. Thank You ~Doug Rooney Sonoma Tilemakers IT Manager 7750 Bell Rd. Windsor Ca, 95492 (707) 837-8177 X211 (707) 837-9472 FAX it@xxxxxxxxxxxxxxxxxxxx