[THIN] Re: Shadowing Logging?
- From: "Landin, Mark" <Mark.Landin@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 17 Nov 2004 13:56:43 -0600
That's a parameter that you set up during installation of MF. To my
knowledge it cannot be changed at a later date. You are stuck with what
you selected at install-time. (Other options are whether the shadow
target is notified that they are being shadowed or not).
________________________________
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of jgates@xxxxxxxxxxxxxx
Sent: Wednesday, November 17, 2004 1:30 PM
To: thin@xxxxxxxxxxxxx
Cc: thin@xxxxxxxxxxxxx; thin-bounce@xxxxxxxxxxxxx
Subject: [THIN] Re: Shadowing Logging?
It's not showing up in the System Log? Does it work for MF1.8?
Thanks,
Jobe
"Ron Oglesby" <Roglesby@xxxxxxxxxxxx>
Sent by: thin-bounce@xxxxxxxxxxxxx
11/17/2004 02:12 PM
Please respond to thin
To: thin@xxxxxxxxxxxxx
cc:
Subject: [THIN] Re: Shadowing Logging?
Event log
Ron Oglesby
Director of Technical Architecture
RapidApp, Chicago
Office: 312 372 7188
Mobile: 815 325 7618
email: roglesby@xxxxxxxxxxxx
________________________________
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of jgates@xxxxxxxxxxxxxx
Sent: Wednesday, November 17, 2004 12:54 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Shadowing Logging?
Does any know where or if Shadowing connections are logged?
This is on MPS 3.0 and MF 1.8.
Thanks,
Jobe
Other related posts:
