[THIN] Re: Refresh issues on application login screen
- From: "Ron Oglesby" <roglesby@xxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Fri, 2 Aug 2002 06:15:14 -0500
Could be something with the app where it times out internally after
about an hour.
Have you tried putting the client on a 2k Pro box or workstation and
letting the login screen sit open for a hour on that?
Ron
-----Original Message-----
From: Anthony_Abraham@xxxxxxxxxxxxxxx
[mailto:Anthony_Abraham@xxxxxxxxxxxxxxx]=20
Sent: Friday, August 02, 2002 12:09 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Refresh issues on application login screen
Hi
I have an interesting issue where we have a third party application that
runs on Metaframe 1.8 (SP3). The application has a login window, if I
minimise this and leave it for 1 hour, the graphics on the login window
goes black. If the user proceeds to login, the application returns a
memory error. Application works fine if user starts published app and
logs
on straight away. Only fails when the login screen if left for around 1
hour. We have no timeout or disconnection settings set. Tried setting
the
app to run in a window - same issue.
Anyone seen such an issue?
Anthony
CAUTION - This message is intended for the addressee named above
It may contain privileged or confidential information. If you are not
the
intended recipient of this message you must not use, copy, distribute or
disclose it to anyone other than the addressee. If you have received
this message in error please return the message to the sender by
replying to it and then delete the message from your computer.
Internet emails are not necessarily secure. Royal & SunAlliance does not
accept responsibility for changes made to this message after it was sent
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=3Dproducts&product=3Dsdfxp
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
