[THIN] Re: Redirect requests on port 80 to port 443
- From: "Chad Schneider (IT)" <Chad.M.Schneider@xxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 19 Feb 2008 10:03:21 -0600
Found it, my firewall guys forgot to allow port 80 on the firewall, therefore,
it could not get there, to redirect.
>>> On 2/19/2008 at 9:46 AM, <CMS0914@xxxxxxxxxxxxx> wrote:
Confirmed, enabled on each.
>>> On 2/19/2008 at 9:29 AM, <cstalhood@xxxxxxxxx> wrote:
Is the redirect enabled on both? It is not on by default.
On Feb 19, 2008 9:23 AM, Chad Schneider (IT) <Chad.M.Schneider@xxxxxxxxxxxxx>
wrote:
I have 2 CAG's.
Both on same firmware.
1 works fine for redirecting requests on port 80 to port 443 (https://).
The other, is set to do this, but will only connect properly, if you type the
address with the https:// before it. If http://, it simply fails to find the
site?
Ideas?
Chad Schneider
Systems Engineer
ThedaCare IT
920-735-7615
Other related posts:
