[THIN] Re: Published apps and routers
- From: "Ryan Lambert" <rlambert@xxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 1 Jul 2003 09:46:45 -0400
Hi marty,
I have an ip route statement to the remote segment directed out the
(only) serial interface. Inter-LAN communication is fine. But broadcasts
are prevented.
-----Original Message-----
From: Marty [mailto:Marty@xxxxxxxxxxxx]
Sent: Tuesday, July 01, 2003 10:37 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Published apps and routers
You may need to ROUTE ADD the remote subnet on the server so that the
remote clients can see the server.
----- Original Message -----
From: Ryan <mailto:rlambert@xxxxxxxxxxxxxxx> Lambert
To: thin@xxxxxxxxxxxxx
Sent: Tuesday, July 01, 2003 9:19 AM
Subject: [THIN] Published apps and routers
Hi all,
Question for you.
I preconfigured and shipped a couple of routers to a customer of ours
and they both went in successfully. The customer says now that the
routers are in they can connect to the terminal server across the
router, however cannot bring up any published apps.
Nothing is being filtered, since this is all inter-LAN.
Anyone know why this would occur? I'm not sure it has anything at all to
do with the routers.
--
Ryan Lambert
Systems & Network Engineer
NetSource
1242 East 49th Street
Suite 0503B, Third Floor
Cleveland, OH 44114
Ph/fax: 216-373-2757
http://www.netsourceit.com
Other related posts:
