You need to review the following document... http://support.citrix.com/article/CTX107415&searchID=10267945 And make the changes as per the following document.... http://support.citrix.com/article/entry.jspa?entryID=3526 Then it should work the way you want. Kind regards, Jeremy Saunders Senior Technical Specialist ceruleanTM an IBM Australia Company formerly known as Logicalis Level 2, 1060 Hay Street West Perth WA 6005 AUSTRALIA Visit us at http://www.cerulean.com.au/ P: +61 8 9261 8412 F: +61 8 9261 8536 M: TBA E-mail: Jeremy.saunders@xxxxxxxxxxx "Schneider, Chad M" <CMSchneider@Bemi To s.com> thin@xxxxxxxxxxxxx Sent by: cc thin-bounce@freel ists.org Subject [THIN] Printing situation 27/10/2005 12:21 AM Please respond to thin PS 4.0 Using policy to create imported network print queues. Grant users 2. Also am allowing local (non-network) printer autocreation. I want the users to be able to choose their default printer and have it saved so the next time they connect, the same printer is the default, I think this is similar to what other have recently asked for. I do not have hotfix 22 installed. I can set a printer as default, log off and on, fine. I change it, logoff and back on, and it is not holding the new one. Chad ******************************************************** This Weeks Sponsor: Cesura, Inc. Know about Citrix end-user slowdowns before they know. Know the probable cause, immediately. Know it all now with this free white paper. http://www.cesurasolutions.com/landing/WPBCForCitrix.htm?mc=WETBCC ******************************************************** Useful Thin Client Computing Links are available at: http://thin.net/links.cfm ThinWiki community - Excellent SBC Search Capabilities! http://www.thinwiki.com *********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thin.net/citrixlist.cfm