[THIN] Re: Printing help - Autocreate
- From: "Pavlo Ignatusha" <PIGNATUSHA@xxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 15 Feb 2006 14:10:29 -0500
UPD stands for Universal Print Driver. You may map some print drivers to it or
globally set to autocreate only using UPD.
When user logs in and no errors are in the log the printer might have been
created but disconnected for some reason. From the client session press Ctrl+F3
and click "New" and type printcfg. Will you see the autocreated printer now? It
should say it is "Disconnected". there is a button on the toolbar and you may
try to connect it.
Thanks,
Pavlo Ignatusha
Systems Network Coordinator
Pembroke Regional Hospital
tel. (613) 732-3675 #6150
fax. (613) 732-9986
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of
Rick Fogarty
Sent: February 15, 2006 2:02 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Printing help - Autocreate
Domain users (which the client is) has write privs. I know I'm supposed to
know what UPD is, but what is it?
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of
Mike Semon
Sent: Wednesday, February 15, 2006 1:22 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Printing help - Autocreate
What are you permissions set for %systemroot%\system32\Spool for these users on
the server? Third party driver may require
at least write access. Also what about UPD?
Mike
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of
Rick Fogarty
Sent: Wednesday, February 15, 2006 7:45 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Printing help - Autocreate
I've inherited a Citrix box (Presentation Server 3.0) and am trying to get
printing to work for several clients. I'm published multiple apps for these
clients and they're working fine, however, I can't seem to get the printers
configured properly.
I was under the impression that if a driver was loaded on the server, say HP LJ
1100, when a client logs on with that client printer, it should auto create.
Is that right? I've already ensured that the server properties identifies the
proper driver and the connect client printer at logon is selected.
My laserprinter is autocreated, the new clients printers are not.
What exactly am I missing?
The information in this email belongs to the Pembroke Regional Hospital
and may contain confidential and privileged information for the sole use
of the individual or organization to which it is addressed. If you are
not the intended recipient, you are hereby notified that any disclosure,
copying or distribution of the contents of this email is prohibited.
If you have received this email in error, please contact the sender and
destroy all copies of the original message.
Other related posts:
