[THIN] Re: Printer not printing over Citrix MetaFrame 1.8

  • From: John_Orf@xxxxxxxxx
  • To: thin@xxxxxxxxxxxxx
  • Date: Thu, 3 Oct 2002 10:02:10 -0500


Try putting the exact description of the printer (case, spaces, etc...) in
the wtsuprn file and use the HP4 driver.  I've had some luck with that
driver and uncommon printers.  If not, there are alot of good, inexpensive
printers out there that will work.

Jorf


                                                                                
                                                       
                      Stuart Donnelly                                           
                                                       
                      <Stuart.Donnelly@        To:       "'thin@xxxxxxxxxxxxx'" 
<thin@xxxxxxxxxxxxx>                                   
                      cmg.com>                 cc:                              
                                                       
                      Sent by:                 Subject:  [THIN] Printer not 
printing over Citrix MetaFrame 1.8                         
                      thin-bounce@freel                                         
                                                       
                      ists.org                                                  
                                                       
                                                                                
                                                       
                                                                                
                                                       
                      10/03/2002 09:33                                          
                                                       
                      AM                                                        
                                                       
                      Please respond to                                         
                                                       
                      thin                                                      
                                                       
                                                                                
                                                       
                                                                                
                                                       





All,

We have a client with a HP OfficeJet K80 printer (driver installed is a HP
OfficeJet K Series driver).  This printer print locally fine, and over a
network share.  But when he is connected to the MetaFrame 1.8 server,
nothing happens when he prints, not spooling no error, nothing.

Does anyone have any ideas on what is going on and where to look for a
solution.  Apart from telling him to buy a decent printer.

Regards,

Stuart Donnelly
Consultant
CMG Limited
Stuart.Donnelly@xxxxxxx
Tel: +44 (0)1438 310300
Fax/Voice Mail: +44 (0)7092 399623
Web: http://www.cmg.co.uk

Internet communications are not secure and therefore CMG Limited, does not
accept legal responsibility for the contents of this message.  Any views or
opinions presented are solely those of the author and do not necessarily
represent those of CMG Limited, unless otherwise specifically stated.  If
the content of this e mail is to become contractually binding, it must be
made in writing & signed by a duly authorised representative of CMG Limited


**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************

For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.

http://thethin.net/citrixlist.cfm




**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************

For Archives, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link.

http://thethin.net/citrixlist.cfm

Other related posts: