All, We have a client with a HP OfficeJet K80 printer (driver installed is a HP OfficeJet K Series driver). This printer print locally fine, and over a network share. But when he is connected to the MetaFrame 1.8 server, nothing happens when he prints, not spooling no error, nothing. Does anyone have any ideas on what is going on and where to look for a solution. Apart from telling him to buy a decent printer. Regards, Stuart Donnelly Consultant CMG Limited Stuart.Donnelly@xxxxxxx Tel: +44 (0)1438 310300 Fax/Voice Mail: +44 (0)7092 399623 Web: http://www.cmg.co.uk Internet communications are not secure and therefore CMG Limited, does not accept legal responsibility for the contents of this message. Any views or opinions presented are solely those of the author and do not necessarily represent those of CMG Limited, unless otherwise specifically stated. If the content of this e mail is to become contractually binding, it must be made in writing & signed by a duly authorised representative of CMG Limited ********************************************** This weeks sponsor 99Point9.com 99Point9 helps solve your unresolved technical server-based questions, issues and incidents. http://www.99point9.com *********************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm