Replace the spooler files? Anything in that Printers directory under spool can flat out be deleted. No need to replace them. Is it actually a good practice to clean them out once in a while Ron Oglesby Senior Technical Architect =20 RapidApp Office 312.372.7188 Mobile 312.961.2380 email roglesby@xxxxxxxxxxxx =20 -----Original Message----- From: Kristof.DeMey@xxxxxxxxxxxxxx [mailto:Kristof.DeMey@xxxxxxxxxxxxxx] Sent: Thursday, November 14, 2002 9:46 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Printer issues Yes i had something like that i got the error "the rpc server is unavailable",=20 i replaced the spoolerfiles with those from another nt4 srv and it was solved.... Hope this helps ! REgards Kristof -----Original Message----- From: Michael Boggan [mailto:MBoggan@xxxxxxxxxxx] Sent: Thursday, November 14, 2002 4:39 PM To: THIN (E-mail) Subject: [THIN] Printer issues I go to START - SETTINGS - PRINTERS and then the printer window comes up. Then it locks up. If I put cursor over printer window i just get an hour glass but I can do other things on the server. has anyone seen this before? -------------------------------------------- Michael Boggan, Network Eng/Citrix Admin Virtual Desktop Inc. Dallas, Tx ph. (972) 960.6400 f. (972) 960.6445 email. mboggan@xxxxxxxxxxx -------------------------------------------- ***********************************************=20 For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm ***********************************************=20 For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm *********************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm