[THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
- From: Jez <jezosaurus@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Mon, 4 Feb 2008 10:18:30 +0100
You need to be specific about the model of the server - Compaq are now
defunct, and "G5" can apply to a number of different types of
hardware. Depending on the server model, you may well find the same
technology in servers that don't carry a "G5" label...
Check and double-check firmware and drivers. You need to be 100%
certain that you're usign the latest, as there has been the odd issue
with certain NIC drivers that have been fixed recently, and you may
have hit one of them.
On Feb 4, 2008 9:30 AM, Andrew Wood <andrew.wood@xxxxxxxxxxxxxxxx> wrote:
>
>
>
> Hi,
>
> Has anyone been able to successfully boot a Compaq G5 to an ADS/WDS build?
>
> Every driver I try comes up with a RAMDISK error – I've seen an article that
> suggests using specific Broadcom II drivers but I've had no joy with that
> either
>
> Tia.
>
> Andrew
>
>
>
> Gilwood CS Ltd
>
> Registered Office : 197 Leechmere Road, Sunderland, UK, SR2 9DL. No.
> 6099397 England
>
>
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
Other related posts:
