All I have specified in WI 4 under "edit secure gateway settings" is: FQDN: my FQDN Secure Port: 443 http://servername/Scripts/ctxsta.dll under secure ticket authority URLs and use load balancing checked In the CAG, the STA tab specifies: Server: IP of WI server with port 80 indicated Path: /Scripts/CtxSTA.dll ________________________________ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Joe Shonk Sent: Wednesday, January 04, 2006 1:27 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: PS 4.0 and STA Yes... How do you specify in WI 4.0 what port to use? The only thing it asks is for a URL to the ctxsta.dll... Yet adding a :8080 to the end of the URL doesn't seem to work. Joe On 1/4/06, Evan Mann <emann@xxxxxxxxxxxxxxxxxxxxx> wrote: I think I may be running what you are asking. I know: XML is on 8080 I run WI on a 2003 Server I have CAG 4.1 and on the STA tab, I have my WI server specified. If this is what you are trying to do, let me know what settings in particular you are after. ________________________________ From: thin-bounce@xxxxxxxxxxxxx [mailto: thin-bounce@xxxxxxxxxxxxx <mailto:thin-bounce@xxxxxxxxxxxxx> ] On Behalf Of Joe Shonk Sent: Wednesday, January 04, 2006 11:45 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] PS 4.0 and STA Has anyone gotten the built in STA function to work with WI/CSG or WI/CAG when IIS is installed on the Box and the XML service is running on port 8080? If so, what configuration changes have to be made? Joe