[THIN] Re: PNAgent site won't work.
- From: Jeff Pitsch <jepitsch@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Wed, 18 Nov 2009 11:21:25 -0500
All version of WI/CSG support all versions of XenApp
On Wed, Nov 18, 2009 at 11:14 AM, Jason Benway <benwayj@xxxxxxxxxxx> wrote:
> Thank you, Maybe I'll try upgrading my WI and CSG, do the new versions of
> these still support PS4?
>
> jb
>
> ------------------------------
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *Carl Stalhood
> *Sent:* Monday, November 16, 2009 5:28 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: PNAgent site won't work.
>
> You probably don't have SG enabled on your PNAgent site. If you upgrade
> WI then there'll be a configuration option to enable SG on your PNAgent
> site. If you stick with your current version of WI, you'll need to modify
> webinterface.conf in the PNAgent site to enable SG. Check out the
> webinterface.conf file in your WI site to compare. I have had some success
> copying the WI site's webinterface.conf to the PNAgent site's
> webinterface.conf and adding back in the couple lines that are specific to
> PNAgent.
>
>
> On Mon, Nov 16, 2009 at 2:47 PM, Jason Benway <benwayj@xxxxxxxxxxx> wrote:
>
>> I'm trying to get the PNAgent site setup and working.
>> I have the WI and CSG on the same box.
>> the WUI is working fine, but I can't get the PNAgent site to work.
>>
>> It will connect, but when I try to launch an app I get this error:
>> http://pic.gd/d8958b
>>
>> There are no firewalls between my machine the WI/CSG server and the citrix
>> farm.
>> I'm doing all this testing internally on the LAN
>>
>> the CSG is version 3.0.1
>> and the WI is version 4.2.4.7648
>>
>> I tried the citrix forums first but got no response:
>> http://forums.citrix.com/thread.jspa?threadID=255190&tstart=0
>>
>>
>> Jason Benway
>> System/Storage Engineer
>>
>> www.jsjcorp.com
>> *JSJ* *Corporation
>> *700 Robbins Road
>> Grand Haven, MI 49417
>> ------------------------------
>> This message may contain confidential and/or privileged information. If
>> you are not the addressee or authorized to receive this for the addressee,
>> you must not use, copy, disclose or take any action based on this message
>> or any information herein. If you have received this message in error,
>> please advise the sender immediately by reply e-mail and delete this
>> message. Thank you for your cooperation.
>>
>>
>
>
Other related posts:
