We have similar system setup and running. Our system has Cicso 1200 APs, Cisco ACS 1111 (RADIUS) and proxy service to AD. Works for all the AD users just like wired authentication. You can email me offline for details. Thanks, Pavlo Ignatusha Systems Network Coordinator Pembroke Regional Hospital tel. (613) 732-3675 #6150 fax. (613) 732-9986 -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Luchette, Jon Sent: December 23, 2005 1:35 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] OT: Wireless WPA w/PEAP We are trying to setup wireless using WPA with TKIP using PEAP authentication. It works now for any user in the built-in Administrators group within Active Directory, but fails for normal domain user accounts. Does anybody know what the permission or setting is required for a general user to be able to authenticate to AD via wireless? _______________________________________________ Jon Luchette Emerson Hospital Technology Specialist III Work: 978-287-3369 Cell: 978-360-1379 jluchette@xxxxxxxxxxxxxxx _______________________________________________ -- The information in this email belongs to the Pembroke Regional Hospital and may contain confidential and privileged information for the sole use of the individual or organization to which it is addressed. If you are not the intended recipient, you are hereby notified that any disclosure, copying or distribution of the contents of this email is prohibited. If you have received this email in error, please contact the sender and destroy all copies of the original message.