It also stores its config on the first drive in the array, but the new card must be identical to recognize it. Is the new card identical, including firmware? Without an IDENTICAL card, you'll need to reintitialize and go to tape. Bob -----Original Message----- From: Michael Boggan [mailto:MBoggan@xxxxxxxxxxx] Sent: November 7, 2003 3:04 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: OT: Perc raid card problem It's a perc2/sc and no, we didn't have it on disk. _________________________________ Michael Boggan Network Engineer/Citrix Admin Virtual Desktop Inc. Dallas, Texas Ph: (972) 960-6400 Fax: (972) 960-6445 email: mboggan@xxxxxxxxxxx http://www.virtualdesktopinc.com <http://www.virtualdesktopinc.com/> _________________________________ -----Original Message----- From: Higgins, Bob [mailto:BHiggins@xxxxxxxxxxxxxx] Sent: Friday, November 07, 2003 4:08 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: OT: Perc raid card problem Do you have the config of the old card backed up on floppy? Is the new card identical to the old? What card, revision, etc? Bob Higgins, MCSE Information Systems Server Administrator Chinook Health Region 960 19th Street South Lethbridge, Alberta T1J 1W5 www.chr.ab.ca Phone: (403) 382-6338 Fax: (403) 382 6046 E-mail: bhiggins@xxxxxxxxx -----Original Message----- From: Michael Boggan [mailto:MBoggan@xxxxxxxxxxx <mailto:MBoggan@xxxxxxxxxxx> ] Sent: November 7, 2003 2:56 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] OT: Perc raid card problem I had a raid card go bad in a server. I replaced it with another and now I can't get it to see the pervious drive configs. How can I reconfigure this card to see the old drive configuration? _________________________________ Michael Boggan Network Engineer/Citrix Admin Virtual Desktop Inc. Dallas, Texas Ph: (972) 960-6400 Fax: (972) 960-6445 email: mboggan@xxxxxxxxxxx http://www.virtualdesktopinc.com <http://www.virtualdesktopinc.com> _________________________________