I changed the engine but it did not seem to solve the problem. Any ideas? Maybe a complete reboot is needed? Regards, Ruud Bransen Databalk bv <http://www.databalk.nl> www.databalk.nl www.diskis.nl <http://www.diskis.nl> -----Original Message----- From: Rowlandson, John [mailto:John.Rowlandson@xxxxxxxxxxxxx] Sent: donderdag 27 juni 2002 10:07 To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: OT: Netshield taking to long to scan thought so, 4.1.40 gives that error with the newer dat files -----Original Message----- From: Ruud Bransen [mailto:rb@xxxxxxxxxxx] Sent: Thursday, June 27, 2002 6:01 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: OT: Netshield taking to long to scan It's engine 4.1.40. The AV is only scanning his local drives, inbound only. I don't know why it's taking so long, maybe it's because of some temp files being created. Anyway, I'll change the engine to 4.1.60. Thanx Regards, Ruud Bransen Databalk bv <http://www.databalk.nl> www.databalk.nl <http://www.diskis.nl> www.diskis.nl -----Original Message----- From: Rowlandson, John [mailto:John.Rowlandson@xxxxxxxxxxxxx] Sent: donderdag 27 juni 2002 9:58 To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: OT: Netshield taking to long to scan check your engine is 4.1.60 also, why are you scanning network drives? you should have your AV on the fileserver locally scaning the files -----Original Message----- From: Ruud Bransen [mailto:rb@xxxxxxxxxxx] Environment: File/printserver: W2K (sp2) with Netshield (4.5 sp1) Citrixservers: MF XP (FR2/SP2) - W2K (SP2) - No virusscanner Opening a document (500KB) in Excel, Word, etc. from the file and printserver is taking about 40 seconds when Netshield is activated. It takes about 1 second when Netshield is not activated. Can anyone point me in some direction. TAI.