Why not use OWA? matt.mccomas@xxxxxxxxxxxxxx -----Original Message----- From: Vince Tan [mailto:VinceT@xxxxxxxxxxxx] Sent: Wednesday, March 12, 2003 3:39 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] OT: Access Exchange from outside firewall Hi Everyone, I've been working on this for the better half of the day and can't seem to get anywhere. I'm trying to setup an Outlook client to connect to my Exchange 2K server. The Outlook client is outside the firewall connected via the internet. I already setup the HLKM\System\CurrentControlSet\Service\MSExchangeDS\Parameters, HKLM\System\CurrentControlSet\Services\MSExchangeIS\ParametersSystem to point to static port. I also configured the firewall already for those 2 ports.=20 When I start the Outlook client, I get "Exchanger server unavailable". Oh, I also set up the hosts file to point to the right ip address for the exchange server. Thanks for any help Vince ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm