[THIN] Re: NFUSE with NAT

  • From: "Stansel, Paul" <Paul.Stansel@xxxxxxxxxxxxx>
  • To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
  • Date: Wed, 12 Mar 2003 08:47:06 -0500

The easiest way to do what you're asking with NFuse 1.5 is to use Project
Columbia.  It let's you script internal vs. external IP ranges.  That said,
you'd be better off upgrading to 1.7

-Paul

> ----------
> From:         k9momof3[SMTP:k9momof3@xxxxxxxxxxx]
> Reply To:     thin@xxxxxxxxxxxxx
> Sent:         Wednesday, March 12, 2003 8:35 AM
> To:   thin@xxxxxxxxxxxxx
> Subject:      [THIN] NFUSE with NAT
> 
> Hi all.  I'm using W2k and MFXP.  We are currently running NFUSE 1.5.  I
> just brought up a new webserver and installed NFUSE 1.7.  I use a Pix
> firewall with NAT.  Currently, we cannot access NFUSE from inside the
> firewall.  I poked around and found the pubic IP of the metaframe server
> is hard-coded into at least one of the NFUSE files.  (p.s.  I did not set
> this up.)  I would like to set this up correctly before I move everyone
> over to 1.7.  I believe that I will have to use altaddr to set up the
> public ip of the metaframe server and then set up the translation in NFUSE
> admin.  Correct?  Also, If I add the alternate address to the metaframe
> server, is there a command to remove it in case it breaks a ton of
> functionality?  Lastly, are Login.asp & applist.asp the only two files
> that could have hard-coded ips that I'll need to edit?  Thanks all!
> *********************************************************
> This Week's Sponsor - RTO Software / TScale
> TScale increases terminal server capacity. 
> Get 30-40% more users per server to save $$$ and time. 
> Add users now! - not more servers. If you're using Citrix, 
> you must learn about TScale!  Free 30-day eval:
> http://www.rtosoft.com/Enter.asp?ID=79
> **********************************************************
> 
> For Archives, to Unsubscribe, Subscribe or 
> set Digest or Vacation mode use the below link:
> http://thethin.net/citrixlist.cfm
> 
*********************************************************
This Week's Sponsor - RTO Software / TScale
TScale increases terminal server capacity. 
Get 30-40% more users per server to save $$$ and time. 
Add users now! - not more servers. If you're using Citrix, 
you must learn about TScale!  Free 30-day eval:
http://www.rtosoft.com/Enter.asp?ID=79
**********************************************************

For Archives, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm

Other related posts: