You are loading your Raid adapter and Scsi adapter at F6, and your partition is correct. I agree. Check your driver versions. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Tom Flanagan Sent: Sunday, March 16, 2003 10:44 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Murphy's law on St Pats 4096 -----Original Message----- From: Euan Cooper [mailto:Euan.Cooper@xxxxxxxxxxxx] Sent: Monday, 17 March 2003 11:26 AM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: Murphy's law on St Pats What size are you making your boot partition? -----Original Message----- From: Tom Flanagan [mailto:Tom.flanagan@xxxxxxxxxxxxxxxxxxxx] Sent: Monday, 17 March 2003 1:07 p.m. To: 'Thin (E-mail) Subject: [THIN] murphy's law on St Pats Ever been stuck in a server room all weekend wondering "what the hell am = I doing in I.T."....Am I better off as an icecream salesmans with a beach = side store. =20 After spending 3hours trying to load a scsi raid driver for a NT4 tse install because I wasn't pressing F6 at the right time I proceeded with = my install. (thanks to the group). =20 Building two servers the NT install Bluescreens at the very end of the install........after your windows configuration section. The exact = failure on one server was at an "installing printer drivers" section. = Bluescreens with a Stop 0x0A errors IRQL_NOY_LESS_OR_EQUAL****. I have found a = couple of articles 165863 and followed resolution tips like disabling caching, disable sync negotiation and scsi controlers...check the hcl for raid = and diskdrives. No good. =20 =20 I cannot install NT4.0 TSE sp3 onto an intel server (phoenix bios 4.0 rls6.0)...with adaptec Array1000ua Raid controller(BIOS 4.20.23) using = 18GB seagate cheeta SCSI HDDs. Anybody ?? =20 Adaptec Aic 7896 SCSI controller (Bios v2.20.s1b1) =20 PS 9GB hard dont work either. =20 Regards =20 Tom Flanagan IT Network Administrator Kailis & France Foods Ph: +61 8 9273 6281 Mob: 0408 927 247 email: tom.flanagan@xxxxxxxxxxxxxxxxxxxx =20 =20 =20 ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity.=20 Get 30-40% more users per server to save $$$ and time.=20 Add users now! - not more servers. If you're using Citrix,=20 you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=3D79 ********************************************************** For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity.=20 Get 30-40% more users per server to save $$$ and time.=20 Add users now! - not more servers. If you're using Citrix,=20 you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=3D79 ********************************************************** For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm