[THIN] Re: Multiple printers with thin clients
- From: "Greg Reese" <GReese@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 22 May 2003 10:50:13 -0400
so the remote office has one remote IP and its own firewall? Do you =
have the remote office setup as a subnet? You could then just give the =
new printer an ip of that subnet and set a route on your firewall. What =
kind of firewall are you using?
Greg
-----Original Message-----
From: Scott Reichardt [mailto:sreichardt@xxxxxxx]
Sent: Thursday, May 22, 2003 10:33 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Multiple printers with thin clients
Using NAT, I have a remote office with only thin clients and a network =
printer (not physically connected to the thinclient) who connect to a mf =
xp fr2 server farm across the wan. Their print traffic gets redirected =
back to the printer at the remote office fine. My problem is, there is =
going to be more than one printer at this remote office. I'll need to =
distinguish which printer the print job gets redirected to. How will I =
do this with only one external IP assigned to the remote office? For =
the one printer I just have the firewall map the port its connecting on =
to the internal IP of the printer. Unless there is a way to change =
printer port numbers for the additional printers, how is this going to =
be possible when I just have the one external IP assigned to me? =
Netbios sharing isn't an option because those ports are blocked by my =
ISP.
********************************************************
This Week's Sponsor - NetX Inc Thin Clients
NetX develops embedded flexible client solutions, customized to
your specifications. Our clients are easy to configure, extremely
secure and remotely managed.=20
http://www.netxinc.com/
**********************************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
********************************************************
This Week's Sponsor - NetX Inc Thin Clients
NetX develops embedded flexible client solutions, customized to
your specifications. Our clients are easy to configure, extremely
secure and remotely managed.
http://www.netxinc.com/
**********************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
Other related posts:
