Thanks for the tip Berny From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Berny Stapleton Sent: 02 July 2009 12:59 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Multicast CISCO config Then that's all you need. 2009/7/2 Mubiru Edwin Moses <mubirum@xxxxxxxx> Yes I have igmp snooping running by default and ive not seen anything unusual on my LAN yet. Thanks From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Berny Stapleton Sent: 02 July 2009 09:54 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Multicast CISCO config I presume you have ip igmp snooping turned on. If you aren't sending this stuff around between too many switches or routing it across your WAN, you don't need Rendezvous points or anything like that. IGMP will do predominately what you want. If you are going between multiple VLANs then you will need to turn on sparse-dense mode. Berny 2009/7/2 Mubiru Edwin Moses <mubirum@xxxxxxxx> Hi All When running NLB on the terminal servers with Multicast IGMP enabled, does anyone know the specific Cisco configurations on the switch. I am running a 3600 series switch with this config and so far no problems but I want to be sure that none will crop up on the switching side of things Thanks Moses This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.