[THIN] Re: Multicast CISCO config
- From: Berny Stapleton <berny@xxxxxxxxxxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Thu, 2 Jul 2009 07:53:46 +0100
I presume you have ip igmp snooping turned on.
If you aren't sending this stuff around between too many switches or routing
it across your WAN, you don't need Rendezvous points or anything like that.
IGMP will do predominately what you want. If you are going between multiple
VLANs then you will need to turn on sparse-dense mode.
Berny
2009/7/2 Mubiru Edwin Moses <mubirum@xxxxxxxx>
> Hi All
>
>
>
> When running NLB on the terminal servers with Multicast IGMP enabled, does
> anyone know the specific Cisco configurations on the switch. I am running a
> 3600 series switch with this config and so far no problems but I want to be
> sure that none will crop up on the switching side of things
>
>
>
> Thanks
>
>
>
> Moses
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the system manager.
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail.
>
Other related posts:
