Can you enumerate the apps, but just not connect to them? ________________________________ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Matt Barys Sent: Monday, June 07, 2004 2:54 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: Metaframe 1.8 Published Application They are there. That's what's confusing. The servers are listed as 192.168.0.82, .83, and .84. If I'm a client on 192.168.0.0 everything works great. If I'm a client on 192.168.100.0, I can't get the ICA Client to find the servers. I even gave the three Citrix servers a .100 address each and tried it that way with no luck. Matt -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Gabe Knuth Sent: Monday, June 07, 2004 2:41 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Metaframe 1.8 Published Application How is the Application Set configured? Check the primary servers under the app set properties and see if you have the MF server(s) listed. If it's empty, that probably explains it. ________________________________ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Matt Barys Sent: Monday, June 07, 2004 12:17 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Metaframe 1.8 Published Application I have a question for all. Up until Saturday, my Published Application called Fairrington Desktop which is the desktop for our users doesn't work anymore when we are on the second subnet. If I set up a new client I can't even see that or my servers in the list, but if I go back on the original subnet 192.168.0.0 everything is fine. If I'm on the second subnet (192.168.100.0) I can go directly to one of the servers, but not through the Published Application. If there anything I can look at to see when this is happening? Thanks, Matt