[THIN] Re: Hotfix PSE400R01W2K3074 and 76 needed with rollup pack 2?

  • From: "Joe Shonk" <joe.shonk@xxxxxxxxx>
  • To: <thin@xxxxxxxxxxxxx>
  • Date: Wed, 27 Sep 2006 13:41:29 -0700

Interesting.  A couple of notes tho.

 

If Citrix is supporting R01 then why has 95% of the Post R01 HFs been
removed from the site?

Why is there not an equivalent version of the 74 and 76 available for R02?
(R02 is essentially R01 with all of the HFs installed)

 

Thanks,

 

Joe

 

 

  _____  

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Erika Peltz
Sent: Wednesday, September 27, 2006 10:59 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Hotfix PSE400R01W2K3074 and 76 needed with rollup pack
2?

 

If you do not need the fixes listed in the readmes for HF 74 and 76, and you
are planning on upgrading to HRP 02, then you can hold off from installing
those hotfixes.  After you upgrade to HRP 02, you can then look for the
equivalent post HRP 02 hotfixes that will be posted to the web to get those
bug fixes and other bug fixes that are not in HRP 02.  To find the
equivalent hotfixes search the Knowledge Center using the bug fix number
from the readmes.  For example:

 

1.      If the "User must change password at next logon" check box is
selected, the IMA Service may terminate unexpectedly when that user uses
Program Neighborhood. 

[From PSE400R01W2K3076][#133058] 

 

 

There is always a cut-off point where we can not take any more fixes into a
HRP.  At the same time, we are trying to accommodate customers who are not
planning to rollout a HRP for a few months, for example.  So we are
purposely supporting (on a limited basis) two platforms of PS 400:  PS 400
with HRP01 and PS 400 with HRP 02.  The main supported platform is always
the product with the latest HRP.

 

We will be updating the readmes on Hotfix 74 and 76 tonight stating:

 

If you install Hotfix Rollup Pack 2 for Presentation Server 4.0 after
installing this hotfix, the functionality provided by this hotfix will be
lost.  In this case please contact your Citrix support representative for a
replacement post Hotfix Rollup Pack 2 hotfix.

 

Hope this helps clarify things.

 

Regards,

 

Erika

 

 

 

  _____  

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Turman, David C.
Sent: Wednesday, September 27, 2006 12:14 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Hotfix PSE400R01W2K3074 and 76 needed with rollup pack
2?

 

 

    So, you are saying if I did not have these fixes and I then installed
HPR02, I need to

    install the fixes, right? (sorry, I'm kinda thick sometimes)

 

  _____  

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Jim Kenzig http://ThinHelp.com
Sent: Wednesday, September 27, 2006 11:06 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Hotfix PSE400R01W2K3074 and 76 needed with rollup pack
2?

Holy moly a response from someone actually Citrix! You've been tagged.  : )


Thanks Erika.

Jim

Erika Peltz <Erika.Peltz@xxxxxxxxxx> wrote:

The bug fixes included in HF 74 and 76 did not make it into HRP 02.  These
hotfixes are for environments that have HRP 01 installed on the servers (as
stated at the top of the Hotfix readme).  If you install these hotfixes and
then upgrade to HRP 02 the bug fix functionality will regress.  You will
then need to apply post HRP 02 hotfixes that include those same bug fixes.  

 

Thanks,

 

Erika

 


  _____  


From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of BRUTON, Malcolm, GBM
Sent: Wednesday, September 27, 2006 3:09 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: Hotfix PSE400R01W2K3074 and 76 needed with rollup pack
2?

 

The R01 part normally means after Rollup 1

 

Malcolm

 


  _____  


From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Alphen IT
Sent: 27 September 2006 08:06
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Hotfix PSE400R01W2K3074 and 76 needed with rollup pack 2?

 

Hi Guys,

 

Silly question...but the tea machine broke down so my brain is functioning
at a level that I'm able to breathe... 


I just saw that Citrix released PSE400R01W2K3074 and PSE400R01W2K3076. 

The readme does not say that Rollup Pack 2 is required for these hotfixes.
But they were released AFTER rollup pack 2. 

 

Can anybody shed some light on this...? Do this fixes need to be applied on
a MPS4 box which has Rollup Pack 2 installed..? 

 

Regards

 

Aleks

 

Jim Kenzig <mailto:web%20at%20kenzig.com>  

Microsoft MVP - Terminal
<https://mvp.support.microsoft.com/profile=23AEC72D-4582-47DE-8516-85D400AD9
29A>  Services

Provision <http://www.provisionnetworks.com/vipprogram.aspx>  Networks VIP
CEO The Kenzig Group
http://www.kenzig.com <http://www.kenzig.com/> 
Blog: http://www.techblink.com <http://www.techblink.com/> 

Terminal Services Downloads: http://www.thinhelp.com
<http://www.thinhelp.com/> 

 
<https://mvp.support.microsoft.com/profile=23AEC72D-4582-47DE-8516-85D400AD9
29A> 

 

Other related posts: