[THIN] Re: Help is appreciated....
- From: "TSguy92 Lan" <tsguy92@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Tue, 29 Apr 2008 13:39:25 -0700
Chad, are you using CAG + AAC / Advanced Access Control?
if so, this issue is by design. During our setup I actually called CTX
support on it, and was informed that's the case.
Consider the fact that the CAG by default "denies" any connection with is
not explicitly defined as allowed. That's the issue you're likely fighting.
Port 80 / 443 traffic to *.*.*.* is not defined as allowed for the CAG,
therefore, it won't pass that traffic on. Sadly, you can't define wildcards
like this in the CAG / AAC config.
Setup an allowed resource for the ip addresses for www.abc.com or something
similar on Port 80 and it will work.
Our work around for this was the following entries on our AAC server as
"allowed" resources for our VPN users.
server - 128.0.0.0, subnet - 128.0.0.0, port - 80, 443, protocol - TCP
server - 0.0.0.0, subnet - 128.0.0.0, port - 80, 443, protocol - TCP
HTH
Lan
On 4/29/08, Chad Schneider (IT) <Chad.M.Schneider@xxxxxxxxxxxxx> wrote:
>
> CAG 4.5.
>
> We want to make an SSL VPN connection via the CAG. We want split
> tunneling off (I feel for obvious reasons), but are now unable to get to
> external internet sites. Our VPN users get an internal IP address, with an
> internal Default gateway. We have 3 static routes into our internal
> network. All requests to the internal network work fine. No requests to
> any external site work.
>
> How can I make this work, allowing no split tunneling, but also allowing
> internet traffic to the outside of the network.
>
> Chad Schneider
> Systems Engineer
> ThedaCare IT
> 920-735-7615
>
Other related posts:
