G1 to G2 is just an update of the 5x controller driver. You can add this to the G1 and it will find it when you boot the G2. G2 to G3 is a no go as G3's use the new Ultra320 SCSI drives and don't support anything else. You'll have to use ghost or some other kind of imaging solution for this jump. I use the Compaq rapid deployment pack, which is free to use for the first 30 days I think, and this supports PXE so no problem with boot disks. Richard -----Original Message----- From: Claus, Brian [mailto:BClaus@xxxxxxxxxxxxx] Sent: 02 July 2003 15:43 To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Ghosting DL360G3 One warning: 360 G1's do not mirror with G2's by default. You need to first update a driver (I believe it's the NIC) and then boot it up on a G2. If you just break a G1 and recreate on a G2, you will get BSOD. I'm not sure if the same holds true for a G2-G3 mirror. _____ Brian Claus, A+, Network+, MCP Network Administrator WESCO Distribution, Inc. 225 West Station Square Drive, Suite 700 Pittsburgh, PA 15219-1122 Phone: 412-454-2412 Fax: 412-454-2540 <mailto:bclaus@xxxxxxxxxxxxx> bclaus@xxxxxxxxxxxxx _____ -----Original Message----- From: Magnus [mailto:magnus@xxxxxxxx] Sent: Wednesday, July 02, 2003 10:38 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Ghosting DL360G3 so you would have to pull the server out of the domain break the mirror , put the disk in a new machine, change the name, join the domain. Is that correct? -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Claus, Brian Sent: Wednesday, July 02, 2003 9:57 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Ghosting DL360G3 Sid changes when you join the domain... _____ Brian Claus, A+, Network+, MCP Network Administrator WESCO Distribution, Inc. 225 West Station Square Drive, Suite 700 Pittsburgh, PA 15219-1122 Phone: 412-454-2412 Fax: 412-454-2540 <mailto:bclaus@xxxxxxxxxxxxx> bclaus@xxxxxxxxxxxxx _____ -----Original Message----- From: Magnus [mailto:magnus@xxxxxxxx] Sent: Wednesday, July 02, 2003 9:35 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Ghosting DL360G3 You would also have to change the SID as well -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Claus, Brian Sent: Wednesday, July 02, 2003 8:16 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Ghosting DL360G3 Don't forget, you can also build that server with a RAID 1 array, just break the mirror, boot up another server with one half of the broken mirror, rename and re-ip the server and you're in. (Network card settings need to be refreshed to set the MAC address) _____ Brian Claus, A+, Network+, MCP Network Administrator WESCO Distribution, Inc. 225 West Station Square Drive, Suite 700 Pittsburgh, PA 15219-1122 Phone: 412-454-2412 Fax: 412-454-2540 <mailto:bclaus@xxxxxxxxxxxxx> bclaus@xxxxxxxxxxxxx _____ -----Original Message----- From: M [mailto:mathras@xxxxxxxxxxxxxxxx] Sent: Tuesday, July 01, 2003 4:58 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Ghosting DL360G3 Oh yes Thanks for reminding me about http://www.nu2.nu/bootdisk/ <http://www.nu2.nu/bootdisk/> I also have that bootdisk modified to work with the DL360 G3. Ill dig it out if anyone wants a copy regards ----- Original Message ----- From: Gabe Knuth <mailto:gabek@xxxxxxxxxxxxxxxxx> To: thin@xxxxxxxxxxxxx <mailto:thin@xxxxxxxxxxxxx> Sent: Tuesday, July 01, 2003 9:49 PM Subject: [THIN] Re: Ghosting DL360G3 I found a kick butt boot disk that will auto-detect network drivers, and had a lot of prebuilt NIC packages for download. You can get more info and downloads from http://www.nu2.nu/bootdisk/ <http://www.nu2.nu/bootdisk/> ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs Email Security System. For more information on a proactive email security service working around the clock, around the globe, visit http://www.messagelabs.com ________________________________________________________________________ ******************************************************** This weeks sponsor - RTOSoft TScale Complaints about applications response time - DO SOMETHING ABOUT IT! TScale 2.0 improves applications response time and increases terminal server capacity. Really get MORE from your existing servers! Free eval: http://www.rtosoft.com/enter.asp?id0 ********************************************************** Useful Thin Client Computing Links are available at: http://thethin.net/links.cfm For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm