[THIN] Re: Getting the following MFCOM.exe error after reboot
- From: Jeff Pitsch <jepitsch@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Mon, 17 Oct 2005 16:12:47 -0400
yea I was just trying to see if McAfee was actually the issue or not. Easier
to disable it temporarily to see if it is the problem, than wait and see for
patching. Immediate answer versus possibly putting on a patch that breaks
more stuff.
Jeff
On 10/17/05, Evan Mann <emann@xxxxxxxxxxxxxxxxxxxxx> wrote:
>
> 11 has issues on Domain Controllers. It was replaced with 11a which uses
> the filter drive from 10. Otherwise, it seems to be fine.
>
> ------------------------------
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *Schneider, Chad M
> *Sent:* Monday, October 17, 2005 4:03 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: Getting the following MFCOM.exe error after reboot
>
> I will first patch it, I see patches 10 and 11 are out, and reference
> from an iForum presentation, that 11 is useful.
>
> My Mcafee guy did not even know 11 was available.
>
> ------------------------------
>
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *Jeff Pitsch
> *Sent:* Monday, October 17, 2005 2:55 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: Getting the following MFCOM.exe error after reboot
>
> Have you tried disabling it to see if it corrects the problem. Lately
> with my clients, I'm seeing lots of issues iwth mcafee and metaframe.
>
> Jeff
>
> On 10/17/05, *Schneider, Chad M* <CMSchneider@xxxxxxxxx> wrote:
>
> I definitely have it, Mcafee, has been on these servers for years. 8.0.
>
> ------------------------------
>
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *Jeff Pitsch
> *Sent:* Monday, October 17, 2005 2:28 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: Getting the following MFCOM.exe error after reboot
>
> the age old question, Anti-virus?
>
> Jeff
>
> On 10/17/05, *Schneider, Chad M* < CMSchneider@xxxxxxxxx> wrote:
>
> "mfcom.exe - Application Error : The instruction at "0x77fcc024"
> referenced memory at "0x00000000". The memory could not be written."
>
> Information at CTX 105062 is not the answer.
>
> MPS 3.0
>
> W2K SP4.
>
>
>
Other related posts:
