[THIN] Domain logon scipt not running - fixed but drive mappings need a refresh?
- From: "Rosemary Sarkis" <rosemary_sarkis@xxxxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Tue, 05 Nov 2002 08:26:47 +1100
Hi
I seem to have it working now. However, the application (File Manager in
this case) is launching before the logon script has completed so the drive
mappings don't appear unless I press F5. Has anyone seen this before. Is
there a way to suppress the app from starting until the script is finished
so all letters are visible without the need to refresh??
Thanks
Rose
PS - Thanks for the info Jim, I shall take a look into Kix...
"Jim Hathaway" <JimH@xxxxxxxxxxxxxxx>
Sent by: thin-bounce@xxxxxxxxxxxxx
04/11/2002 16:16
Please respond to thin
To: <thin@xxxxxxxxxxxxx>
cc:
Subject: [THIN] Re: Domain logon scipt not running
Rosemary,=20
Try setting the following settings in the registry on your server, it
will not only allow you to kill the NW login script, but should allow
you to set default tree and context settings for all users.=20
HKLM\system\currentcontrolset\servies\nwcworkstation\parameters\logon
logonscript - REG_Dword - '0'
PerferredServer - Reg_SZ - '*treename/context'
HKLM\system\currentcontrolset\services\nwcworkstation\parameters
DefaultLocation - REG_SZ - '*treename/context'
DefaultScriptOPtions - Reg_Dword - '0'
After making these changes, restart the gateway service for NW on the
server and the changes should take effect.=20
Combined with the last e-mail I sent, I suggest you take a good look at
kix for doing this stuff. It can map netware and NT drives, but it can
only do it based on NT users and groups. You can't beat 'careware'
though, and it's got a very thorough word doc on how to get it to do
what you need, full of samples. Plus the website has a great forum with
all sorts of scripting gurus willing to help out those in need.
HTH
J
-----Original Message-----
From: Rosemary Sarkis [mailto:rosemary_sarkis@xxxxxxxxxxx]=20
Sent: Sunday November 03, 2002 9:47 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Domain logon scipt not running
I have a WTS Server with Metaframe XPe installed with Gateway services
for=20
netware. I want to run the NT Domain login script only and it is not=20
running. I have set the Preferred Server in the Gateway Services config
to=20
None but Run Login Script is still ticked.
My domain logon script is not running for any user. Is there an issue
with=20
the domain logon script if gateway services is installed but not used??
90%=20
of our users require gateway services, the other 10% only require a
domain=20
logon script.
How can I get the domain logon script to run for these users??
Thanks
Rose
PS - Im feeling very blonde today........ sorry for the stupid
questions...
_________________________________________________________________
Broadband? Dial-up? Get reliable MSN Internet Access.
http://resourcecenter.msn.com/access/plans/default.asp
***********************************************
Visit Jim Kenzig of thethin.net at the
Emergent Online Booth #26 at Citrix Iforum 2002!
Register now at:
http://www.citrixiforum.com/registerNow.html
***********************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
