Greg, This happens to me frequently when using Ghost to clone CMF servers. Have a look at the following MSKB articles and it should explain what is happening to you and how to correct the problem. It is a bit of a butt pain to correct, but I've done it several times with success. http://support.microsoft.com/kb/249321 http://support.microsoft.com/kb/223188/EN-US/ Hope this helps. Regards, Rob -----Original Message----- From: Greg Watts [mailto:cgwatts@xxxxxxxxx] Sent: Wednesday, December 29, 2004 10:26 AM To: Thin Subject: [THIN] "DL580 Raid 1 Mirroring" I am trying to clone a Win2k3 server on a DL580 and am following the Advanced Conpets guide in doing so but I am having a rough go of it. When I remove drive 0 from an existing server and install it in a server with nothing on it. I successfully bring the server up and am doing the following: 1. Stop IMA service and set to manual 2. Rename Server name 3. Run Newsid /a newservname 4. Reboot The problem is when I reboot at this time it is trying to install something using Wininstall. It then goes into a loop and it never allows me to log on. The server is also not getting on the network. Does anyone successfully cloning servers using the smart array controllers (6400) by breaking mirror sets? What am I missing? Thanks! -- Greg Watts cgwatts@xxxxxxxxx cgwatts@xxxxxxxxxxx 410.274.3076 (cell) ******************************************************** This Weeks Sponsor SeamlessPlanet.com Domain Names Register your .com domain name for as low as $7.85 One of the lowest prices on the web! Part of The Kenzig Group. http://www.seamlessplanet.com ********************************************************** Useful Thin Client Computing Links are available at: http://thin.net/links.cfm ThinWiki community - Awesome SBC Search Capabilities! http://www.thinwiki.com *********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thin.net/citrixlist.cfm This message may contain confidential and/or privileged information. If you are not the intended recipient or authorized to receive this for the intended recipient, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by sending a reply e-mail and delete this message. Thank you for your cooperation.