Actually, it don't work from another server, either. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Roger Riggins Sent: Wednesday, July 06, 2005 8:00 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: DHCP Question Open MMC on a different server (with adminpak or dhcp tools) and see if you can manage it from there. I'd guess it's an MMC thing, not a problem with your scopes. Good luck, Roger -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Turman, David C. Sent: Wednesday, July 06, 2005 3:15 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] DHCP Question We have a DHCP server with about 200 scopes on it. When I go to a particular scope and click either on the Address Leases or Reservations entry I get "Snap-In failed to initialize". There is also a big red X on each of these folders I can go to Address Pool or Scope Options just fine. Also, the Address Lease and Reservations on any other scope. Is this scope corrupt? By the way, 2003 Standard.