[THIN] Re: Connectopn problem with latest ICA client and PS 4 .0
- From: "Lilley, Brian" <brian.lilley@xxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Thu, 1 Dec 2005 14:34:53 -0000
yeah watchout people! another gotcha with CGP wrapped ICA, i.e. session
reliability over 2598, is that some SSL/Firewall/intermediate so-called
transparent comms kit will happily take a session at 2598, but should you drop
session reliability on the server side, for instance, stop the ima service then
the citrix server will fallback to 1494, but the SSL/Firewall/intermediate
device will stay waiting on 2598 and keep the 2598 conversation up (on the
servers behalf).. for ever.. unless of course you turn of spoofed
handshaking/keepalives/orwhatever it is that keeps the conversation up on the
intermediate device.. I must admit that I haven't looked into this too deeply,
i.e. we fixed why the servers were not responding on 2598 and never went back
to address the acknowledgements/keepalives on the SSL box.. so never really got
to the bottom of it.. anyway, be aware.. since I think it is fairly common
practice for admins to kill imaserv on the fly (and session reliability is
dependent on imaserv)...
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On
Behalf Of Jonny Tobiassen
Sent: 01 December 2005 14:21
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Connectopn problem with latest ICA client and PS 4.0
thanks
So simple can it be. It was the option 'session relibility'. It seems to be
standard set on newer clients, and I didnt think of that :-)
best regards,
Jonny
"Matthew
Shrewsbury"
<MShrewsbury@COSC To
ANHOMES.com> <thin@xxxxxxxxxxxxx>
Sent by: cc
thin-bounce@freel
ists.org Subject
[THIN] Re: Connectopn problem with
latest ICA client and PS 4.0
01.12.2005 14:30
Please respond to
thin@xxxxxxxxxxxx
g
Could it be the 9.x client is trying to use session reliability on port
2598 and the 7.1 is using ICA on 1494? Maybe the 2598 port is not open on
the firewall?
Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+
Senior Network Administrator
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Jonny Tobiassen
Sent: Thursday, December 01, 2005 8:19 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Connectopn problem with latest ICA client and PS 4.0
Hello all,
I have a problem driving me crazy:
I have an application set on Presentation Server 4.0 and Cisco PIX FW with
NAT.
Everything is configured to work through FW.
When using old ICA client, in this case v 7.1, everythng workes fine. I set
up application set with TCP/IP and use alternate address. I find the
application set and can connect.
Problem is when using newest ICA client, v. 9.1. Exactly same settings. I
can find application set, but connection times out.
Error says: "There is no Citrix Metaframe configured on the specified
address". But it works great with client v. 7.1.
I dont understand what can be the problem.
Any ideas??
mvh
Jonny Tobiassen
Hålogaland IKT-Senter AS
Tlf. 770 42605
--
This message has been scanned for viruses and dangerous content by The
MailScanner at Halogaland IKT Senter, www.hikt.no, and is believed to be
clean.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
--
This message has been scanned for viruses and dangerous content by The
MailScanner at Halogaland IKT Senter, www.hikt.no, and is believed to be
clean.
--
This message has been scanned for viruses and dangerous content by The
MailScanner at Halogaland IKT Senter, www.hikt.no, and is believed to be clean.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
==============================================================================
Please access the attached hyperlink for an important electronic communications
disclaimer:
http://www.csfb.com/legal_terms/disclaimer_external_email.shtml
==============================================================================
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
Other related posts:
