Yes we had the same problem, I have a private fix from Wyse, don't know if they have made it available on their general release yet. My terminal rev is - 4.3.039i Eric -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Scott Sent: Wednesday, December 24, 2003 12:11 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Connecting to disconnected session Does this never happen to anyone else or is this normal Citrix operation? -----Original Message----- From: Scott [mailto:sreichardt@xxxxxxx] Sent: Monday, December 22, 2003 2:46 PM To: 'thin@xxxxxxxxxxxxx' Subject: Connecting to disconnected session Setup: Using two MFXP FR3 on Win2k sp3 servers load balanced in one farm. Clients connect with WYSE 1200LE winterms on internal LAN. Only the Desktop is published. Disconnect timeout is set to 30 min, Idle timeout is set to 60 min. On broken or timeout setting is set to disconnect. Users can reconnect from any client. Problem: Why is it sometimes when a user hits their idle timeout and gets disconnected, when they log in, they might happen to get that session back, but they might get on the other server and not reconnect to the session. This leaves their other session in a disconnected state. I've looked around the faq and citrix kb and found some similar problems with the session getting disconnected but staying in an active state, but my users sessions are in a disconnected state which I thought they should be able to reconnect. It doesn't matter how long they are disconnected either. Thanks, Scott