RE: [THIN] Citrix Metaframe XPa FR3 On Win2k Listener Ports Blue Screening ServerOutstanding Jim, It worked like a charm, delted them in the registry and used Term Service Config to create new on all 3 servers. I owe you a beer or 2. Shane -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Jim Hathaway Sent: Wednesday, October 08, 2003 1:43 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Citrix Metaframe XPa FR3 On Win2k Listener Ports Blue Screening Server Try using the built in Terminal Services Configuration utility to add this listener port Shane. You should be able to delete the listeners from there as well. I had a similar problem a short while ago on a Compaq DL360 G2 system. Citrix support had me remove the ICA listener from a server, and every-time I attempted to add it back in via the Citrix Connection config utility the server would blue screen right when I was at the point of selecting the protocol for the new listener. In my case I was performing this process remotely via an RDP connection. But I had no issues in setting up the port with the Term Services Config util. HTH J PS - the original problem I was having with this particular server which caused me to remove and recreate the ICA listener did eventually require a complete re-install of MF to the server. Hope that's not the case for you. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Shane Broomhall (CCI MCT) Aust Sent: Tuesday, October 07, 2003 5:46 AM To: Thin. net Mailing List Cc: shaneb@xxxxxxxxxxxxxxxxxx Subject: [THIN] Citrix Metaframe XPa FR3 On Win2k Listener Ports Blue Screening Server HI All, I have been working on a project moving a client to Citrix. They have 3 DL380 Servers that I built with the Smart Start Disks, and Windows 2000 Server, Service Pack 3. the Servers are all Dual processors with 4 G of Ram and Dual Mirrored Disks. I have Installed Project 98, Office 2k, and the normal apps on the server. I put XPa FR3 on the Servers and RDP works fine. I added Licences for MF tonight and tried to start configuring the clients to connect. I received error messages about CTX server not responding, even though the farm name was discovered easily. On investigation it appeared that there was an ICA TCP listener port installed, but it had the Icon for the Dial In Async Connections. Any attempt to select the port to view its properties resulted in an error message that indicated that the information for the listener port could not be read from the registry, using Citrix Connection Configuration. Using Terminal Services Adminstration I am able to open the properties of the listener port but not able to delete it. On one of the Servers I deleted the listener port using the registry editior, but any attempts to recreate it causes the server to blue screen with an indication that it had difficulties reading part of the memory and that the cpq???.sys driver was in error. i am not at work at the moment but when i looked at the driver name it appeared to be the Compaq drivers that were having the problems. i attempted to reinstall the Smart Start drivers, but this was not helpfull. Any attempt to recreate a listener port causes the blue screen. My next thought is to uninstall MF and reinstall, to try to fix this issue. if anyone has had this problem before or has any thoughts or hints they would be very gratefully received. Thanks and Take care Shane Broomhall Brisbane Australia