Changed it from 8080 to 8081... Then did "telnet localhost 8081" Also made a TCP/IP+HTTP connection to the box. Changed it back to 8080. Telnetted to port 8080 and made another connection without ever restarting the service. -----Original Message----- From: Schneider, Chad M. [mailto:CMSchneider@xxxxxxxxx] Sent: Monday, August 18, 2003 9:02 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Citrix MFXP FR2 Administration Guide Error REALLY? I have changed it at that location, and it did nothing. I had to us the CTXXMLSS. Also, I needed to at least bounce the service. How do you know it is working? What did you do to test? _____ From: Ryan Lambert [mailto:rlambert@xxxxxxxxxxxxxxx] Sent: Monday, August 18, 2003 7:44 AM To: thin@xxxxxxxxxxxxx It states the following: Citrix XML Service. The MetaFrame Settings tab displays the port used by the Citrix XML service for TCP/IP+HTTP browsing by ICA Clients. This setting cannot be edited here, but you can change the port for a server with a command. To change the port setting, at the system command prompt, type ctxxmlss /rxxxxx, with the actual port number following /r. This configures the service to auto start on port xxxxx. To activate the new settings, you have to stop and start the service. Well, I have both configured the XML port from the Metaframe Settigns tab, and tested that it is listening WITHOUT restarting. -- Ryan Lambert Systems & Network Engineer NetSource 1242 East 49th Street Suite 0503-B, Third Floor Cleveland, OH 44114 Ph/Fax: 216-373-2757 http://www.netsourceit.com