[THIN] Re: Changing default Trend Scanning options
- From: "Alphen IT" <alphenit@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Mon, 17 Sep 2007 08:49:59 +0200
Thanks James,
I'll have a look at this, if it doesn't work for me, I'm afraid I'll have to
take a look at OfficeScan :-s
Boy, I wish there was a company that made virusscanners for the sole purpose
of helping out Terminal Servers admins..!
Regards
Aleks
- - - - -
*From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *Namens
*Uhrich, James
*Sent:* donderdag 13 september 2007 22:49
*To:* thin@xxxxxxxxxxxxx
*Subject:* [THIN] Re: Changing default Trend Scanning options
If you setup one of the TS servers as an Information Server (rather than
Normal Server), configure all your settings, then push out to your other TS
servers, this should standardize your settings. I'm not sure that it's wise
to leave a TS server configured this way, but you can turn back into a
Normal server after you're done…?
To set exclusions on all servers after the fact, you can simply select all
thru the Serverprotect mgmt console and change settings on all
simultaneously.
James
Other related posts:
