[THIN] Re: Cannot connect to 4.5 server externally
- From: "Peterson David" <DPETERSO@xxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 28 Apr 2009 12:25:10 -0400
Altaddr is set, I also completely disabled the client firewall to make sure
that wasn't causing an issue. I can connect to my 4.0 servers fine from the
outside via the quick launch. Client version is 11.0.0.5357.
________________________________
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of
Jeff Pitsch
Sent: Tuesday, April 28, 2009 10:28 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Cannot connect to 4.5 server externally
is your NAT setup properly and your altaddr on the citrix box? In program
neighbhorhood did you configure your firewall button correctly?
Jeff Pitsch
On Tue, Apr 28, 2009 at 9:53 AM, Peterson David
<DPETERSO@xxxxxxxxxxx<mailto:DPETERSO@xxxxxxxxxxx>> wrote:
We have a new 4.5 server in it's own farm, on server 2003. I can connect
internally using a custom ICA connection or quick launch but cannot connect
from the Internet (we don't have WI for this system installed yet.)
When I try to connect via Quick launch over the Internet I get a protocol
driver error, from a custom ica connection I get XenApp server not available.
Telnetting to port 1494 (get ICA) and 2598 work, as does connecting via rdp.
From inside the network I can connect via ICA fine, but only using the internal
name. On our 4.0 servers, I can connect using either.
Anyone have any suggestions?
NOTICE: This electronic mail transmission from the law firm of Dinsmore & Shohl
may constitute an attorney-client communication that is privileged at law. It
is not intended for transmission to, or receipt by, any unauthorized persons.
If you have received this electronic mail transmission in error, please delete
it from your system without copying it, and notify the sender by reply e-mail,
so that our address record can be corrected.
Other related posts:
