On this topic, you might want to check the type oif firewall. If its an application layer firewall (Borderware, Netscreen (certain models and config) etc..) you might want to check the way the WI/CSG server is looking at packets. Some firewalls (I know from experience with Borderware) change the packet to have a source of the nearest interface of the firewall, rather than the actual host that sent it. So you will need to configure the WI/CSG server to reflect that. Easy enough to do. Sooooo, what is youre firewall. Tony. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] Sent: Fri 23/01/2004 11:45 a.m. To: thin@xxxxxxxxxxxxx Cc: Subject: [THIN] Re: CSG 2.0 + WebInterface 2.0 --> no STA's are available