Well, I have hacked this up enough to make it work, and work within the legal requirements. CSG doesn't connect to the MF 1.8 farm, but all farms are available from one NFuse page. It's pretty cool. Thanks again, Dennis -----Original Message----- From: Joe Shonk Sent: Wednesday, December 18, 2002 1:24 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: CSG Regardless if you can get CSG to work with MF1.8. It is not licensed = for it. CSG is only for licensed MF FR1/2 servers. This is a snip from = http://download2.citrix.com/ctxlibrary/products/pdf/Citrix_Secure_Gateway= _FAQ.pdf How is CSG packaged, priced and licensed? CSG v1.1 for Windows is available as a standard feature of MetaFrame XP, = Feature Release 2, and is located on the components CD. CSG v1.0 is available to all MetaFrame XP, = Feature Release 1 customers as a download from the Citrix Secure Portal. CSG is licensed under the customer's current MetaFrame license = agreement. Customers with a valid Subscription Advantage contract are also eligible to obtain CSG v1.1 or = CSG v1.0, via download from the Citrix Secure Portal. All MetaFrame servers in use with a CSG must be licensed for MetaFrame = XP, Feature Release 2 (CSG v1.1) or MetaFrame XP, Feature Release 1 (CSG v1.0) -----Original Message----- From: Parker, Dennis [mailto:Dennis.Parker@xxxxxxxxxx] Sent: Wednesday, December 18, 2002 12:58 PM To: THIN@xxxxxxxxxxxxx Subject: [THIN] Re: CSG I'll be a bit more specific now that I have done more testing. I have made CSG work with a 1.8 server farm now, but only on the = standard port (1494). How does CSG know when to use a non-standard = port, which it will for the MF XP farm? More details needed? Farm 1 - NT-TSE 4.0 with MF 1.8 running on port other than 1494 Farm 2 - Win2K with MF XPa running on same port as Farm 1, still not = 1494 Servers from Farm 1 and Farm 2 are all in the Same NT Domain. Separate boxes for NFuse, CSG and STA (separate from Terminal servers). = None of these servers are in NT domains. With Logging turned up on the STA, I can see that the port information = gets passed with the XPa farm (Farm 2) but not with the 1.8 farm (Farm = 1). I'm assuming that NFuse connecting to the XML service on the Win2K = servers that passes the port information, but what (if anything) can I = change on the 1.8 XML service to get it to do the same thing? Anybody have any ideas? Thanks in advance again! Dennis *********************************************** This Weeks Sponsor: 99point9.com The 99Point9.com Online Tech Support Helpdesk is the one-stop solution for all your server-based computing needs. http://www.99point9.com ************************************************ For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm