[THIN] Re: CAE Published application won't launch
- From: "Russell Robertson" <russell@xxxxxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 29 Jan 2008 14:52:26 -0000
Jonathon
Anything in the event logs? Citrix Licensing all done? TS CALs all
configured?
Cheers
Russell
Russell Robertson | Virtual Stream | www.virtualstream.co.uk
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Jonathan Kadoo
Sent: 29 January 2008 14:27
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: CAE Published application won't launch
Well this is a new setup. I have tried launching the published app
internally from a full client and I still get the same result.
Any ideas??
Jonathan
On Jan 29, 2008 5:50 AM, Stephanie Atkinson <miitgal@xxxxxxxxx> wrote:
You don't say if the published apps have worked before. If so, the
typical cause I have seen is either the published app becomes corrupt
(this might be the case if only one pub app is a problem) or one of the
Citrix Services on the server where the app resides is not functioning
properly. Try checking those Services (make sure they are Started). If
they are all Started, you could try rebooting the server anyway.
Good luck,
Stephanie Atkinson
Internet Administrator
ADP Hosting Services
Russell Robertson <russell@xxxxxxxxxxxxxxxxxxx> wrote:
Jonathon
Can you open the ICA file and see how it's configured? Make sure all the
names or IP addresses are correct, are you using SSL, do you see the STA
reference for the address of the published app and so on?
Do published apps work from the Program Neighbourhood? This will confirm
that it's web interface related.
Cheers
Russell
Russell Robertson | Virtual Stream | www.virtualstream.co.uk
<http://www.virtualstream.co.uk/>
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Jonathan Kadoo
Sent: 29 January 2008 01:37
To: thin@xxxxxxxxxxxxx
Subject: [THIN] CAE Published application won't launch
Hi there everyone, this issue is driving me nuts. I am having an issue
with CAE on Windows 2003 server. When I log into the web interface, I
get a list of my published apps. However when I double click on the app
it starts to connect and then stops. No error message. I have tried
this from the external site and the internal site and neither of them
work. I can successfully rdp into the server, just published apps don't
work. I have tried to research the issue on the net but the ideas I
found didn't work.
Any ideas would be greatfully appreciated.
thanks
Jonathan
________________________________
Looking for last minute shopping deals? Find them fast with Yahoo!
Search.
<http://us.rd.yahoo.com/evt=51734/*http:/tools.search.yahoo.com/newsearc
h/category.php?category=shopping>
Other related posts:
