[THIN] Re: AutoCAD DWG Viewer on Citrix

• From: "Moock, Jay" <Jay.Moock@xxxxxxxx>
• To: <thin@xxxxxxxxxxxxx>
• Date: Thu, 9 Nov 2006 09:29:08 -0500

Files have been renamed with .txt extension.
 
FYI - Drive letter references in the .reg and .adm files are as follows, and
may need to be changed for your environment:
 
M:    - System Drive
N:    - Apps Drive
U:    - User Home Directory
 
 
Good Luck!

        -----Original Message-----
        From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]
On Behalf Of Steve Rance
        Sent: Thursday, November 09, 2006 9:22 AM
        To: thin@xxxxxxxxxxxxx
        Subject: [THIN] Re: AutoCAD DWG Viewer on Citrix
        
        

        Thanks Jay,

         

        I would very much like the ADM and .reg files if you can find them
(the ADM you attached to the below message was blocked).  I am under a lot
of pressure to get this AutoCAD viewer working on Citrix.

         

        Thanks again,

        
        Steve

        
________________________________


        From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]
On Behalf Of Moock, Jay
        Sent: 09 November 2006 13:02
        To: thin@xxxxxxxxxxxxx
        Subject: [THIN] Re: AutoCAD DWG Viewer on Citrix

         

        Here is a procedure that one of my colleagues came up with at my
last job for DWG TrueView 2.  It also relies on the attached ADM and a
couple of .reg files that I'll have to dig up.

         

        *        Log on as the local Administrator

        *       Change User /Install

        *        Install from SetupDWGTrueView2.exe

        *        Click OK at the Autodesk Setup prompt

        *        When the installation is complete, Change User /Execute

        *        Open DWG True View 2, then close

        *        Cut the Autodesk folder located in M:\Documents and
Settings\Administrator\Application Data and Paste it in M:\Documents and
Settings\All Users\Application Data\

        *        Cut the Autodesk folder located in M:\Documents and
Settings\Administrator\Local Settings\Application Data and Paste it in
M:\Documents and Settings\All Users\Application Data\

        *        Give users Full Control on "M:\Documents and Settings\All
Users\Application Data\Autodesk"

        *        Merge registry data (will have to dig these .reg files up)

         

                 

CLASS USER

CATEGORY "DWG TrueView 2"

        CATEGORY "DWG TrueView 2"

        POLICY "General Folders"

                KEYNAME "Software\Autodesk\DWG TrueView\R2\DWGV-4001:409"

                PART "Local Root Folder" EDITTEXT
                        VALUENAME "LocalRootFolder"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\"
                        REQUIRED
                END PART

                PART "Roamable Root Folder" EDITTEXT
                        VALUENAME "RoamableRootFolder"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\"
                        REQUIRED
                END PART
        END POLICY ; General DWG TrueView 2 Folders

        POLICY "Profile Folders"
                
                KEYNAME "Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\FixedProfile\General"
                
                PART "Profile Storage Location" EDITTEXT
                        VALUENAME "ProfileStorage"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 
2\R2\enu\Support\Profiles\FixedProfile.aws"
                        REQUIRED
                END PART

        END POLICY ; Profile Folders

        POLICY "MiniDump Files"
                
                KEYNAME "Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\MiniDump"

                PART "Dump File Path" EDITTEXT
                        VALUENAME "DmpFilePath"
                        DEFAULT "U:\acminidump.dmp"
                        REQUIRED
                END PART

                PART "Dump Application Arguments" EDITTEXT
                        VALUENAME "SendAppArgs"
                        DEFAULT "xx"
                        REQUIRED
                END PART

        END POLICY ; MiniDump Files

        POLICY "Editor Configuration"
        
                KEYNAME "Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles\<<Unnamed Profile>>\Editor Configuration"
                
                PART "Custom Dictionary" EDITTEXT
                        VALUENAME "CustomDictionary"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\support\sample.cus"
                        REQUIRED
                END PART

                PART "Font Mapping File" EDITTEXT
                        VALUENAME "FontMappingFile"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\support\dwgv.fmp"
                        REQUIRED
                END PART

                PART "Log File Path" EDITTEXT
                        VALUENAME "LogFilePath"
                        DEFAULT "U:\Windows\"
                        REQUIRED
                END PART

                PART "Save File Path" EDITTEXT
                        VALUENAME "SaveFilePath"
                        DEFAULT "U:\"
                        REQUIRED
                END PART

                PART "XRef Load Path" EDITTEXT
                        VALUENAME "Xrefloadpath"
                        DEFAULT "U:\"
                        REQUIRED
                END PART

        END POLICY ; Editor Configuration

        POLICY "General"

                KEYNAME "Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles\<<Unnamed Profile>>\General"

                PART "DWGV Paths" EDITTEXT
                        VALUENAME "DWGV"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\support;N:\Program 
Files\Autodesk\DWG TrueView\support;N:\Program Files\Autodesk\DWG 
TrueView\fonts;N:\Program Files\Autodesk\DWG TrueView\support\AuthorPalette"
                        REQUIRED
                END PART

                PART "DWGV Log File" EDITTEXT
                        VALUENAME "DWGVLOGFILE"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\dwgv.log"
                        REQUIRED
                END PART

                PART "Alternative Page Setups Template" EDITTEXT
                        VALUENAME "AlternativePageSetUpsTemplate"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 
2\R2\enu\Template\SheetSets\ArchitecturalImperial.dwt"
                        REQUIRED
                END PART

                PART "AVEMAPS" EDITTEXT
                        VALUENAME "AVEMAPS"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\textures"
                        REQUIRED
                END PART

                PART "Colour Book Location" EDITTEXT
                        VALUENAME "ColorBookLocation"
                        DEFAULT "N:\Program Files\Autodesk\DWG 
TrueView\support\AuthorPalette;M:\Documents and Settings\All Users\Application 
Data\Autodesk\DWG TrueView 2\R2\enu\support\AuthorPalette;"
                        REQUIRED
                END PART

                PART "Database Workspace Path" EDITTEXT
                        VALUENAME "DatabaseWorkspacePath"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\Data Links"
                        REQUIRED
                END PART

                PART "Plot Log Path" EDITTEXT
                        VALUENAME "PlotLogPath"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\"
                        REQUIRED
                END PART

                PART "Plot to File Path" EDITTEXT
                        VALUENAME "PlotToFilePath"
                        DEFAULT "U:\"
                        REQUIRED
                END PART

                PART "Printer Configuration Directory" EDITTEXT
                        VALUENAME "PrinterConfigDir"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\plotters"
                        REQUIRED
                END PART

                PART "Printer Description Directory" EDITTEXT
                        VALUENAME "PrinterDescDir"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\plotters\PMP Files"
                        REQUIRED
                END PART

                PART "Printer Style Sheet Directory" EDITTEXT
                        VALUENAME "PrinterStyleSheetDir"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\Plot Styles"
                        REQUIRED
                END PART

                PART "Profile Storage Directory" EDITTEXT
                        VALUENAME "PrinterStorage"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\Support\Profiles\Unnamed 
Profile\Profile.aws"
                        REQUIRED
                END PART
        
                PART "Sheet Set Template Path" EDITTEXT
                        VALUENAME "SheetSetTemplatePath"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\Template"
                        REQUIRED
                END PART
        
                PART "Template Path" EDITTEXT
                        VALUENAME "TemplatePath"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\Template"
                        REQUIRED
                END PART
        
                PART "Tool Palette Path" EDITTEXT
                        VALUENAME "ToolPalettePath"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\support\ToolPalette"
                        REQUIRED
                        END PART
        END POLICY ; General

        POLICY "General Configuration"

                KEYNAME "Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles\<<Unnamed Profile>>\General Configuration"
                
                PART "Menu File" EDITTEXT
                        VALUENAME "MenuFile"
                        DEFAULT "M:\Documents and Settings\All 
Users\Application Data\Autodesk\DWG TrueView 2\R2\enu\support\dwgv"
                        REQUIRED
                END PART
        
                PART "Temp Directory" EDITTEXT
                        VALUENAME "TempDirectory"
                        DEFAULT "N:\"
                        REQUIRED
                END PART

        END POLICY ; General Configuration
        
        POLICY "Reference Manager Settings"

        KEYNAME "Software\Autodesk\Reference Manager\Settings"

                PART "Log File Name" EDITTEXT
                        VALUENAME "LogFileName"
                        DEFAULT "U:\Windows\log.txt"
                        REQUIRED
                END PART

        END POLICY ; Reference Manager Settings

        END CATEGORY ; DWG TrueView 2

END CATEGORY ; DWG TrueView 2

ÿþWindows Registry Editor Version 5.00



[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
 NT\CurrentVersion\Terminal 
Server\Install\Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409]

"TermSrvCopyKeyOnce"=dword:00000001

"LocalRootFolder"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\"

"RoamableRootFolder"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\"



[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
 NT\CurrentVersion\Terminal 
Server\Install\Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles]

"TermSrvCopyKeyOnce"=dword:00000001



[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
 NT\CurrentVersion\Terminal 
Server\Install\Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles\<<Unnamed
 Profile>>]

"TermSrvCopyKeyOnce"=dword:00000001



[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
 NT\CurrentVersion\Terminal 
Server\Install\Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles\<<Unnamed
 Profile>>\Editor Configuration]

"TermSrvCopyKeyOnce"=dword:00000001

"CustomDictionary"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\support\\sample.cus"

"FontMappingFile"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\support\\"



[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
 NT\CurrentVersion\Terminal 
Server\Install\Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles\<<Unnamed
 Profile>>\General]

"TermSrvCopyKeyOnce"=dword:00000001

"AlternativePageSetUpsTemplate"="M:\\Documents
 and Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\Template\\SheetSets\\Architectural
 Imperial.dwt"

"PrinterConfigDir"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\plotters"

"PrinterDescDir"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\plotters\\PMP Files"

"Support"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\support;N:\\Program 
Files\\Autodesk\\DWG 
TrueView\\support;N:\\Program 
Files\\Autodesk\\DWG 
TrueView\\fonts;N:\\Program 
Files\\Autodesk\\DWG 
TrueView\\help;N:\\Program 
Files\\Autodesk\\DWG 
TrueView\\support\\color"

"SheetSetTemplatePath"="M:\\Documents 
and Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\Template"

"TemplatePath"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\Template"

"ToolPalettePath"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\support\\ToolPalette"

"PrinterStyleSheetDir"="M:\\Documents 
and Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\Plot Styles"



[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
 NT\CurrentVersion\Terminal 
Server\Install\Software\Autodesk\DWG 
TrueView\R2\DWGV-4001:409\Profiles\<<Unnamed
 Profile>>\General Configuration]

"TermSrvCopyKeyOnce"=dword:00000001

"MenuFile"="M:\\Documents and 
Settings\\All Users\\Application 
Data\\Autodesk\\DWG TrueView 
2\\R2\\enu\\support\\DWGV"

ÿþWindows Registry Editor Version 5.00



[HKEY_LOCAL_MACHINE\Software\Classes]



[HKEY_LOCAL_MACHINE\Software\Classes\.$$$]

@="DWGTrueViewEmergencyDWGFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.$A]

@="DWGTrueViewTempFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.3ds]

@="3dsFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.ac$]

@="DWGTrueViewTempFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.adt]

@="DWGTrueViewAuditLog"



[HKEY_LOCAL_MACHINE\Software\Classes\.arx]

@="DWGTrueViewExtensionFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.atc]

@="DWGTrueViewToolCatalog"



[HKEY_LOCAL_MACHINE\Software\Classes\.aws]

@="DWGTrueViewWorkSpace"



[HKEY_LOCAL_MACHINE\Software\Classes\.bd]

@="GhostscriptFontFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.blk]

@="DWGTrueViewAttributeExtractionTemplate"



[HKEY_LOCAL_MACHINE\Software\Classes\.cdc]

@="cdc_auto_file"



[HKEY_LOCAL_MACHINE\Software\Classes\.chx]

@="DWGTrueViewStandardsCheckFile.16"



[HKEY_LOCAL_MACHINE\Software\Classes\.ctb]

@="DWGTrueViewColorDependentPlotStyleTableFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.cui]

@="DWGTrueViewCustomizationFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.cus]

@="DWGTrueViewCustomDictionary"



[HKEY_LOCAL_MACHINE\Software\Classes\.dbq]

@="DWGTrueViewDbQueryFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.dbt]

@="DWGTrueViewDbTemplateFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.dbx]

@="DWGTrueViewDatabaseExtensionFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.dce]

@="DWGTrueViewDialogErrorLog"



[HKEY_LOCAL_MACHINE\Software\Classes\.dcl]

@="DWGTrueViewDialogDefinition"



[HKEY_LOCAL_MACHINE\Software\Classes\.dct]

@="DWGTrueViewDictionary"



[HKEY_LOCAL_MACHINE\Software\Classes\.dst]

@="DWGTrueViewSheetSet.16"



[HKEY_LOCAL_MACHINE\Software\Classes\.dvb]

@="DWGTrueViewVBASource"



[HKEY_LOCAL_MACHINE\Software\Classes\.dwg]

@="DWGTrueView.Drawing.16"



[HKEY_LOCAL_MACHINE\Software\Classes\.dws]

@="DWGTrueViewDrawingStandardsFile.16"



[HKEY_LOCAL_MACHINE\Software\Classes\.dwt]

@="DWGTrueViewTemplate.16"



[HKEY_LOCAL_MACHINE\Software\Classes\.dxb]

@="DWGTrueViewDrawingInterchangeBinary"



[HKEY_LOCAL_MACHINE\Software\Classes\.dxf]

@="DWGTrueViewDrawingInterchange.16"



[HKEY_LOCAL_MACHINE\Software\Classes\.dxt]

@="DWGTrueViewDXFIXSupport"



[HKEY_LOCAL_MACHINE\Software\Classes\.dxx]

@="DWGTrueViewDrawingInterchangeAttribute"



[HKEY_LOCAL_MACHINE\Software\Classes\.eps]

@="EncapsulatedPostscript"



[HKEY_LOCAL_MACHINE\Software\Classes\.err]

@="ErrorLogFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.fas]

@="DWGTrueViewAutoLISPFastLoadFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.fax]

@="DWGTrueViewFAXRasterPlot"



[HKEY_LOCAL_MACHINE\Software\Classes\.fdc]

@="DWGTrueViewFieldCatalog"



[HKEY_LOCAL_MACHINE\Software\Classes\.fit]

@="DWGTrueViewFITRasterPlot"



[HKEY_LOCAL_MACHINE\Software\Classes\.fmp]

@="DWGTrueViewFontMap"



[HKEY_LOCAL_MACHINE\Software\Classes\.gsf]

@="GhostscriptDefaultFont"



[HKEY_LOCAL_MACHINE\Software\Classes\.hdi]

@="DWGTrueViewHeidiDeviceInterfaceFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.las]

@="DWGTrueViewLayerState"



[HKEY_LOCAL_MACHINE\Software\Classes\.lin]

@="DWGTrueViewLinetypeDefinition"



[HKEY_LOCAL_MACHINE\Software\Classes\.lli]

@="DWGTrueViewLandscapeLibrary"



[HKEY_LOCAL_MACHINE\Software\Classes\.lsp]

@="AutoLISPFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.mli]

@="DWGTrueViewRenderMaterialsLibrary"



[HKEY_LOCAL_MACHINE\Software\Classes\.mln]

@="DWGTrueViewMultilineDefinition"



[HKEY_LOCAL_MACHINE\Software\Classes\.mnr]

@="DWGTrueViewMenuResource"



[HKEY_LOCAL_MACHINE\Software\Classes\.mns]

@="DWGTrueViewMenuSource"



[HKEY_LOCAL_MACHINE\Software\Classes\.mnu]

@="DWGTrueViewMenuTemplate"



[HKEY_LOCAL_MACHINE\Software\Classes\.nfl]

@="DWGTrueViewFilterList"



[HKEY_LOCAL_MACHINE\Software\Classes\.pat]

@="DWGTrueViewHatchPatternDefinition"



[HKEY_LOCAL_MACHINE\Software\Classes\.pc3]

@="CompleteR16PlotConfigurationFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.pgp]

@="DWGTrueViewProgramParameters"



[HKEY_LOCAL_MACHINE\Software\Classes\.plt]

@="DWGTrueViewPlot"



[HKEY_LOCAL_MACHINE\Software\Classes\.pmp]

@="DWGTrueViewPlotterModelParametersFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.ps]

@="DWGTrueViewPostScriptSupport"



[HKEY_LOCAL_MACHINE\Software\Classes\.psf]

@="DWGTrueViewPostScriptPatterns"



[HKEY_LOCAL_MACHINE\Software\Classes\.pss]

@="DWGTrueViewPlotStampSettings"



[HKEY_LOCAL_MACHINE\Software\Classes\.ptw]

@="DWGTrueViewPublishToWeb"



[HKEY_LOCAL_MACHINE\Software\Classes\.pwt]

@="DWGTrueViewPublishToWebTemplate"



[HKEY_LOCAL_MACHINE\Software\Classes\.rml]

@="DWGTrueViewRedlineMarkupLanguage"



[HKEY_LOCAL_MACHINE\Software\Classes\.sat]

@="StandardACISText"



[HKEY_LOCAL_MACHINE\Software\Classes\.scr]

@="DWGTrueViewScriptFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.shp]

@="DWGTrueViewShapeSource"



[HKEY_LOCAL_MACHINE\Software\Classes\.shx]

@="DWGTrueViewCompiledShape"



[HKEY_LOCAL_MACHINE\Software\Classes\.slb]

@="DWGTrueViewSlideLibrary"



[HKEY_LOCAL_MACHINE\Software\Classes\.sld]

@="DWGTrueViewSlide"



[HKEY_LOCAL_MACHINE\Software\Classes\.slg]

@="DWGTrueViewStatusLog"



[HKEY_LOCAL_MACHINE\Software\Classes\.stb]

@="DWGTrueViewStyleSheetFile"



[HKEY_LOCAL_MACHINE\Software\Classes\.sv$]

@="DWGTrueViewAutosaveDrawing"



[HKEY_LOCAL_MACHINE\Software\Classes\.unt]

@="DWGTrueViewUnitDefinition"



[HKEY_LOCAL_MACHINE\Software\Classes\.wmf]

@="WindowsMetafile"



[HKEY_LOCAL_MACHINE\Software\Classes\.xlg]

@="DWGTrueViewXREFLog"



[HKEY_LOCAL_MACHINE\Software\Classes\.xmx]

@="DWGTrueViewExternalMessage"



[HKEY_LOCAL_MACHINE\Software\Classes\.xtp]

@="ExportedToolPalettes"



[HKEY_LOCAL_MACHINE\Software\Classes\3dsFile]

@="3D Studio Model"



[HKEY_LOCAL_MACHINE\Software\Classes\3dsFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,2"



[HKEY_LOCAL_MACHINE\Software\Classes\AutoCAD.Drawing.16]



[HKEY_LOCAL_MACHINE\Software\Classes\AutoCAD.Drawing.16\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,46"



[HKEY_LOCAL_MACHINE\Software\Classes\AutoLISPFile]

@="AutoLISP Application source"



[HKEY_LOCAL_MACHINE\Software\Classes\AutoLISPFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,82"



[HKEY_LOCAL_MACHINE\Software\Classes\AutoLISPFile\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\AutoLISPFile\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\AutoLISPFile\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\cdc_auto_file]

@="DesignCenter Preview Cache File"



[HKEY_LOCAL_MACHINE\Software\Classes\cdc_auto_file\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,24"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID]



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{3faa4380-a399-11cf-a466-00805fe418f6}]

@="DWG TrueView Icon Shell Extension"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{3faa4380-a399-11cf-a466-00805fe418f6}\InProcServer32]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll"

"ThreadingModel"="Apartment"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{591E5416-DDC3-45E6-BE9D-C40D0B418F6E}]



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{591E5416-DDC3-45E6-BE9D-C40D0B418F6E}\LocalServer32]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe /InPlaceServer"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}]

@="DWG TrueView Drawing"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\AuxUserType]



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\AuxUserType\3]

@="DWG TrueView"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe,0"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\InProcHandler32]

@="ole32.dll"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\Insertable]

@=""



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\LocalServer32]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\MiscStatus]

@="32"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\ProgId]

@="DWG TrueView.Drawing.16"



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\Verb]



[HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8E75D913-3D21-11D2-85C4-080009A0C626}\Verb\0]

@="&Edit,0,2"



[HKEY_LOCAL_MACHINE\Software\Classes\CompleteR16PlotConfigurationFile]

@="DWG TrueView Plotter Configuration 
File"



[HKEY_LOCAL_MACHINE\Software\Classes\CompleteR16PlotConfigurationFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,103"



[HKEY_LOCAL_MACHINE\Software\Classes\CompleteR16PlotConfigurationFile\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\CompleteR16PlotConfigurationFile\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\CompleteR16PlotConfigurationFile\shell\open\command]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\PC3EXE.EXE \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing]

@="DWG TrueView Drawing"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing\CLSID]

@="{8E75D913-3D21-11D2-85C4-080009A0C626}"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing\CurVer]

@="DWG TrueView.Drawing.16"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16]

@="DWG TrueView Drawing"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\CLSID]

@="{8E75D913-3D21-11D2-85C4-080009A0C626}"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,46"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\Insertable]

@=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\protocol]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\protocol\StdFileEditing]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\protocol\StdFileEditing\server]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\protocol\StdFileEditing\verb]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\protocol\StdFileEditing\verb\0]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\open\command]

@="\"N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe\" \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\open\ddeexec]

@="[open(\"%1\")]"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\open\ddeexec\application]

@="DWG TrueView.DDE"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\print]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\print\ddeexec]

@="[_FILEOPEN \"%1\"

_PLOT ]"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\print\ddeexec\application]

@="DWG TrueView.DDE"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shell\print\ddeexec\topic]

@="system"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shellex]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shellex\PropertySheetHandlers]

@="AutoCAD.Drawing.16"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueView.Drawing.16\shellex\PropertySheetHandlers\AutoCAD.Drawing.16]

@="{3faa4380-a399-11cf-a466-00805fe418f6}"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAttributeExtractionTemplate]

@="DWG TrueView Attribute Extraction 
Template File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAttributeExtractionTemplate\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,20"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAuditLog]

@="DWG TrueView Audit Log"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAuditLog\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,10"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAuditLog\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAuditLog\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAuditLog\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAutoLISPFastLoadFile]

@="DWG TrueView Fast-load AutoLISP 
File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAutoLISPFastLoadFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,60"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAutosaveDrawing]

@="DWG TrueView Autosave Drawing"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewAutosaveDrawing\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,143"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewColorDependentPlotStyleTableFile]

@="DWG TrueView Color-dependent Plot 
Style Table File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewColorDependentPlotStyleTableFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,26"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewColorDependentPlotStyleTableFile\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewColorDependentPlotStyleTableFile\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewColorDependentPlotStyleTableFile\shell\open\command]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\STYEXE.EXE \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCompiledShape]

@="DWG TrueView Compiled Shape"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCompiledShape\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,132"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCustomDictionary]

@="DWG TrueView Custom Dictionary"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCustomDictionary\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,28"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCustomDictionary\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCustomDictionary\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCustomDictionary\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCustomizationFile]

@="DWG TrueView Customization File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewCustomizationFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,27"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDatabaseExtensionFile]

@="DWG TrueView Database Extension"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDatabaseExtensionFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,34"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDbQueryFile]

@="DWG TrueView Db Query File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDbQueryFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,32"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDbTemplateFile]

@="DWG TrueView Db Template File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDbTemplateFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,33"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogDefinition]

@="DWG TrueView Dialog Definition"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogDefinition\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,36"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogDefinition\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogDefinition\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogDefinition\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogErrorLog]

@="DWG TrueView Dialog Error Log"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogErrorLog\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,35"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogErrorLog\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogErrorLog\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDialogErrorLog\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDictionary]

@="DWG TrueView Dictionary"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDictionary\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,37"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchange.16]

@="DWG TrueView Drawing Interchange"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchange.16\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,52"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchange.16\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchange.16\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchange.16\shell\open\command]

@="\"N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe\" \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchange.16\shell\open\ddeexec]

@="[open(\"%1\")]"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchange.16\shell\open\ddeexec\application]

@="DWG TrueView.DDE"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchangeAttribute]

@="DWG TrueView Drawing Interchange 
Attribute"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchangeAttribute\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,56"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchangeBinary]

@="DWG TrueView Drawing Interchange 
Binary"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingInterchangeBinary\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,51"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16]

@="DWG TrueView Drawing Standards File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,49"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shell\open\command]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shell\open\ddeexec]

@="[open(\"%1\")]"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shell\open\ddeexec\application]

@="DWG TrueView.DDE"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shellex]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shellex\PropertySheetHandlers]

@="DWG TrueViewDrawingStandardsFile"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDrawingStandardsFile.16\shellex\PropertySheetHandlers\DWGTrueViewDrawingStandardsFile]

@="{3faa4380-a399-11cf-a466-00805fe418f6}"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDXFIXSupport]

@="DWG TrueView DXFIX Support"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDXFIXSupport\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,55"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDXFIXSupport\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDXFIXSupport\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewDXFIXSupport\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewEmergencyDWGFile]

@="DWG TrueView Emergency Backup 
Drawing"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewEmergencyDWGFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,0"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewExtensionFile]

@="DWG TrueView runtime extension"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewExtensionFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,12"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewExternalMessage]

@="DWG TrueView External Message"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewExternalMessage\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,160"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFAXRasterPlot]

@="DWG TrueView FAX Raster Plot"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFAXRasterPlot\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,61"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFieldCatalog]

@="DWG TrueView Field Catalog"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFieldCatalog\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,62"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFilterList]

@="DWG TrueView FilterList"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFilterList\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,95"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFilterList\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFilterList\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFilterList\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFITRasterPlot]

@="DWG TrueView FIT Raster Plot"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFITRasterPlot\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,63"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFontMap]

@="DWG TrueView Font Map"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFontMap\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,64"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFontMap\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFontMap\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewFontMap\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewHatchPatternDefinition]

@="DWG TrueView Hatch Pattern 
Definition"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewHatchPatternDefinition\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,100"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewHatchPatternDefinition\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewHatchPatternDefinition\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewHatchPatternDefinition\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewHeidiDeviceInterfaceFile]

@="DWG TrueView Heidi Device Interface 
File"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewHeidiDeviceInterfaceFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,69"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLandscapeLibrary]

@="DWG TrueView Landscape Library"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLandscapeLibrary\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,78"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLayerState]

@="DWG TrueView Layer State"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLayerState\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,73"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLayerState\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLayerState\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLayerState\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLinetypeDefinition]

@="DWG TrueView Linetype Definition"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLinetypeDefinition\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,77"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLinetypeDefinition\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLinetypeDefinition\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewLinetypeDefinition\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuResource]

@="DWG TrueView Menu Resource"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuResource\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,89"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuSource]

@="DWG TrueView Menu Source"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuSource\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,90"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuSource\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuSource\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuSource\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuTemplate]

@="DWG TrueView Menu Template"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuTemplate\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,91"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuTemplate\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuTemplate\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMenuTemplate\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMultilineDefinition]

@="DWG TrueView Multiline Definition"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMultilineDefinition\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,85"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMultilineDefinition\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMultilineDefinition\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewMultilineDefinition\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPlot]

@="DWG TrueView Plot"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPlot\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,113"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPlotStampSettings]

@="DWG TrueView Plot Stamp Settings"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPlotStampSettings\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,117"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPlotterModelParametersFile]

@="DWG TrueView Plotter Model 
Parameters File"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPlotterModelParametersFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,114"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptPatterns]

@="DWG TrueView PostScript Patterns"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptPatterns\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,116"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptPatterns\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptPatterns\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptPatterns\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptSupport]

@="DWG TrueView PostScript Support"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptSupport\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,115"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptSupport\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptSupport\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPostScriptSupport\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewProgramParameters]

@="DWG TrueView Program Parameters"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewProgramParameters\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,110"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewProgramParameters\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewProgramParameters\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewProgramParameters\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPublishToWeb]

@="DWG TrueView Publish To Web"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPublishToWeb\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,118"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPublishToWebTemplate]

@="DWG TrueView Publish To Web 
Template"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewPublishToWebTemplate\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,119"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewRedlineMarkupLanguage]

@="DWG TrueView Redline Markup 
Language"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewRedlineMarkupLanguage\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,121"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewRenderMaterialsLibrary]

@="DWG TrueView Render Materials 
Library"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewRenderMaterialsLibrary\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,84"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewScriptFile]

@="DWG TrueView Script"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewScriptFile\DefaultIcon]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewScriptFile\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewScriptFile\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewScriptFile\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewShapeSource]

@="DWG TrueView Shape Source"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewShapeSource\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,131"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewShapeSource\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewShapeSource\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewShapeSource\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSheetSet.16]

@="DWG TrueView Sheet Set"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSheetSet.16\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,44"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSheetSet.16\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSheetSet.16\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSheetSet.16\shell\open\command]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe /set \"%L\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSheetSet.16\shell\open\ddeexec]

@="[open(\"%1\")]"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSheetSet.16\shell\open\ddeexec\application]

@="DWG TrueView.DDE"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSlide]

@="DWG TrueView Slide"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSlide\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,134"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSlideLibrary]

@="DWG TrueView Slide Library"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewSlideLibrary\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,133"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStandardsCheckFile.16]

@="DWG TrueView Standards Check File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStandardsCheckFile.16\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,25"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStandardsCheckFile.16\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStandardsCheckFile.16\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStandardsCheckFile.16\shell\open\command]

@="\"N:\\Program Files\\Autodesk\\DWG 
TrueView\\DwgCheckStandards.exe\" 
\"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStatusLog]

@="DWG TrueView Status Log"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStatusLog\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,135"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStatusLog\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStatusLog\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStatusLog\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStyleSheetFile]

@="DWG TrueView Plot Style Table File"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStyleSheetFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,139"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStyleSheetFile\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStyleSheetFile\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewStyleSheetFile\shell\open\command]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\STYEXE.EXE \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTempFile]

@="DWG TrueView Temporary File"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTempFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,3"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16]

@="DWG TrueView Template"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,50"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shell\open\command]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGViewr.exe \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shell\open\ddeexec]

@="[open(\"%1\")]"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shell\open\ddeexec\application]

@="DWG TrueView.DDE"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shellex]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shellex\PropertySheetHandlers]

@="DWG TrueViewTemplate"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewTemplate.16\shellex\PropertySheetHandlers\DWGTrueViewTemplate]

@="{3faa4380-a399-11cf-a466-00805fe418f6}"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewToolCatalog]

@="DWG TrueView Tool Catalog"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewToolCatalog\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,14"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewUnitDefinition]

@="DWG TrueView Unit Definition"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewUnitDefinition\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,153"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewUnitDefinition\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewUnitDefinition\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewUnitDefinition\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewVBASource]

@="DWG TrueView VBA Source"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewVBASource\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,45"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewWorkSpace]

@="DWG TrueView Work Space"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewWorkSpace\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,15"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewXREFLog]

@="DWG TrueView XREF Log"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewXREFLog\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,156"



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewXREFLog\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewXREFLog\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\DWGTrueViewXREFLog\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\EncapsulatedPostscript]

@="Encapsulated PostScript"



[HKEY_LOCAL_MACHINE\Software\Classes\EncapsulatedPostscript\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,58"



[HKEY_LOCAL_MACHINE\Software\Classes\ErrorLogFile]

@="Error log"



[HKEY_LOCAL_MACHINE\Software\Classes\ErrorLogFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,59"



[HKEY_LOCAL_MACHINE\Software\Classes\ErrorLogFile\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\ErrorLogFile\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\ErrorLogFile\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\ExportedToolPalettes]

@="Exported Tool Palettes"

"NoOpen"=""



[HKEY_LOCAL_MACHINE\Software\Classes\ExportedToolPalettes\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,161"



[HKEY_LOCAL_MACHINE\Software\Classes\GhostscriptDefaultFont]

@="GhostscriptDefaultFont"



[HKEY_LOCAL_MACHINE\Software\Classes\GhostscriptDefaultFont\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,67"



[HKEY_LOCAL_MACHINE\Software\Classes\GhostscriptFontFile]

@="Ghostscript Font Catalog"



[HKEY_LOCAL_MACHINE\Software\Classes\GhostscriptFontFile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,17"



[HKEY_LOCAL_MACHINE\Software\Classes\GhostscriptFontFile\Shell]



[HKEY_LOCAL_MACHINE\Software\Classes\GhostscriptFontFile\Shell\open]



[HKEY_LOCAL_MACHINE\Software\Classes\GhostscriptFontFile\Shell\open\command]

@="\"M:\\WINDOWS\\system32\\notepad.exe\"
 \"%1\""



[HKEY_LOCAL_MACHINE\Software\Classes\StandardACISText]

@="Standard ACIS Text"



[HKEY_LOCAL_MACHINE\Software\Classes\StandardACISText\DefaultIcon]



[HKEY_LOCAL_MACHINE\Software\Classes\WindowsMetafile]

@="Windows Metafile"



[HKEY_LOCAL_MACHINE\Software\Classes\WindowsMetafile\DefaultIcon]

@="N:\\Program Files\\Autodesk\\DWG 
TrueView\\DWGVficn.dll,154"

Other related posts:

• » [THIN] AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix
• » [THIN] Re: AutoCAD DWG Viewer on Citrix

1. Home
2. thin
3. Archive
4. 11-2006

---

• » Previous by Date
• » Next by Date
• » Related Posts
• » View list details
• » Manage your subscription

---