[THIN] Re: At Idle Time Logout-High Spooler CPU
- From: "Ron Oglesby" <roglesby@xxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 9 Oct 2002 12:26:45 -0500
Yup. Its an FR2 thing.
How many client printers are these user autocreating?
Ron Oglesby
Senior Technical Architect
=20
RapidApp
Office 312.372.7188
Mobile 312.961.2380
email roglesby@xxxxxxxxxxxx
=20
-----Original Message-----
From: Jensen, Jay [mailto:jjensen@xxxxxxxxx]=20
Sent: Wednesday, October 09, 2002 12:27 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: At Idle Time Logout-High Spooler CPU
I don't see the setting to delete jobs when users log off in the printer
management. Is this a new setting in FR2? I am running FR1 on XP
still. =20
-----Original Message-----
From: Erik Gerard [mailto:GERARDE@xxxxxxx]
Sent: Wednesday, October 09, 2002 12:23 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: At Idle Time Logout-High Spooler CPU
Yes, XP. These are auto-created printers. Typically there are no print =
=3D
jobs in queue when they time out.=3D20
>>> roglesby@xxxxxxxxxxxx 10/09/02 10:12AM >>>
XP I assume. Try this+
In the CMC right click on the printers management node and select
properties.
Try setting it to delete jobs when users log off, or limit the number of
printers they are auto creating at the connection level in Citrix
connection config.=3D3D20
Are you using auto-created client printers, or network assigned, or AD
assigned, etc....
Ron Oglesby
Senior Technical Architect
=3D3D20
RapidApp
Office 312.372.7188
Mobile 312.961.2380
email roglesby@xxxxxxxxxxxx=3D20
=3D3D20
-----Original Message-----
From: Erik Gerard [mailto:GERARDE@xxxxxxx]=3D3D20=3D20
Sent: Wednesday, October 09, 2002 9:08 AM
To: thin@xxxxxxxxxxxxx=3D20
Subject: [THIN] At Idle Time Logout-High Spooler CPU
We have Win2k SP2 & MF-XP SP2. Our servers are set for 1 hour of idle
time =3D3D3D
before logging out of the published applications. When this occurs, we
see =3D3D3D
the spooler drive the CPU utilization to 100%. This is causing delays in
=3D3D3D
typing and mouse clicks.=3D3D3D20
The System Analysts want to cut off our Pilot by Noon (EST) today if we
=3D3D3D
don't fix the problem.=3D3D3D20
ANYONE HAVE ANY SUGGESTIONS???
Thanks,
Erik
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com=3D20
***********************************************
For Archives, to Unsubscribe, Subscribe or=3D3D20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm=3D20
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com=3D20
***********************************************
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm=3D20
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
