[THIN] Re: 0x00000050 BSOD's?

  • From: "Rob Beekmans" <R.Beekmans@xxxxxxxxx>
  • To: <thin@xxxxxxxxxxxxx>
  • Date: Thu, 12 Sep 2002 16:13:08 +0200

Dennis,

Did you try to remove e.g. the label printer. I've seen strange
behauviors with these things. Not BOSD's but it might be worth to try to
remove some server drivers to see if it solves anything.

Grx
Rob

******************************
Rob Beekmans
A-Tree Automatisering
"The Thin-Client Specialist"
<http://www.a-tree.nl>
******************************



-----Oorspronkelijk bericht-----
Van: Turnhout, D. van (Hoge Raad) [mailto:D.vanTurnhout@xxxxxxxxxxx]=20
Verzonden: donderdag 12 september 2002 14:12
Aan: thin@xxxxxxxxxxxxx
Onderwerp: [THIN] Re: 0x00000050 BSOD's?



Allowed printer drivers are:

- Dymo LabelWriter EL60
- Generic / Text only
- HP DeskJet 550C
- HP LaserJet 4 Plus
- HP LaserJet 8000 Sercies PCL 5e
- HP OfficeJet G Series
- Lexmark T620
- Oki ML 395 Elite

The rest uses the Citrix PCL4 Universal Driver

-----Original Message-----
From: Andy Lalaguna [mailto:andylalaguna@xxxxxxxxxxx]=3D20
Sent: donderdag 12 september 2002 13:56
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: 0x00000050 BSOD's?



Couple of things to investigate.
Just my musings, take with large pinch of salt.

1st old chestnut is:
Printer drivers - they are all TSE friendly aren't they?

2nd http://support.microsoft.com/default.aspx?scid=3D3Dkb;en-us;Q281132
or http://support.microsoft.com/default.aspx?scid=3D3Dkb;en-us;Q266762
But you did say you were at SP2 + SR1

You could re-apply the security rollup...?
Of course if you had audting turned on and someone had changed
something,=3D20 you could track them down and roast their extremities?


HTH, andy Lalaguna
>From: "Turnhout, D. van (Hoge Raad)" <D.vanTurnhout@xxxxxxxxxxx>
>Reply-To: thin@xxxxxxxxxxxxx
>To: thin@xxxxxxxxxxxxx
>Subject: [THIN] Re: 0x00000050 BSOD's?
>Date: Thu, 12 Sep 2002 13:43:30 +0200
>
>
>I forgot to mention that we are running W2k Sp2 with SP2SR1 and various

>hotfixes
>
>-----Original Message-----
>From: Rob Beekmans [mailto:R.Beekmans@xxxxxxxxx]=3D3D20
>Sent: donderdag 12 september 2002 13:28
>To: thin@xxxxxxxxxxxxx
>Subject: [THIN] Re: 0x00000050 BSOD's?
>
>
>
>Dennis,
>
>Are your service packs up to date?=3D3D3D20
>I had these crashes a lot before SP2 came out (assuming you run w2k).
>
>grx
>
>******************************
>Rob Beekmans
>A-Tree Automatisering
>"The Thin-Client Specialist"
><http://www.a-tree.nl>
>******************************
>
>
>
>-----Oorspronkelijk bericht-----
>Van: Turnhout, D. van (Hoge Raad) =3D3D=3D20=20
>[mailto:D.vanTurnhout@xxxxxxxxxxx]=3D3D3D20
>Verzonden: donderdag 12 september 2002 13:22
>Aan: Turnhout, D. van (Hoge Raad); Thin (E-mail)
>Onderwerp: [THIN] 0x00000050 BSOD's?
>
>
>
>Hi,
>
>We're suffering from spontaneous BSOD's.
>
>Last week we had 4 servers crashing during work hours.
>Until recently the BSOD's occurred after work hours when few =
people=3D20=20
>where working.
>
>Our servers are Compaq DL 360 G2's with dual CPU's, 1Gbit nic and=20
>2gb=3D20 of memory.
>
>Recent software changes are:
>
>- MSInstaller 2.0
>- Citrix XP FP2/SP2
>- Compaq SmartStart driver upgrade (5.30 to 5.40a)
>
>The only constant in the BSOD's is the 0x50 error code, the code=3D20=20
>between the () Changes with each BSOD.
>
>Any tips or hints?
>
>Bye,
>
>Dennis van Turnhout
>
>
>
>***********************************************************************
>Aan dit bericht kunnen geen rechten worden ontleend. Ministerie =
van=3D20=20
>Justitie.
>***********************************************************************
>
>
>
>**********************************************
>This weeks sponsor 99Point9.com
>99Point9 helps solve your unresolved technical
>server-based questions, issues and incidents. http://www.99point9.com
>***********************************************
>
>For Archives, to Unsubscribe, Subscribe or=3D3D3D20
>set Digest or Vacation mode use the below link.
>
>http://thethin.net/citrixlist.cfm
>
>
>**********************************************
>This weeks sponsor 99Point9.com
>99Point9 helps solve your unresolved technical
>server-based questions, issues and incidents. http://www.99point9.com
>***********************************************
>
>For Archives, to Unsubscribe, Subscribe or=3D3D20
>set Digest or Vacation mode use the below link.
>
>http://thethin.net/citrixlist.cfm
>
>
>
>
>**********************************************
>This weeks sponsor 99Point9.com
>99Point9 helps solve your unresolved technical
>server-based questions, issues and incidents. http://www.99point9.com
>***********************************************
>
>For Archives, to Unsubscribe, Subscribe or
>set Digest or Vacation mode use the below link.
>
>http://thethin.net/citrixlist.cfm


Best Wishes,
Andy Lalaguna
andylalaguna@xxxxxxxxxxx
Mob: +44 (0) 7710 097 456

_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com



**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents. http://www.99point9.com
***********************************************

For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link.

http://thethin.net/citrixlist.cfm




**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents. http://www.99point9.com
***********************************************

For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.

http://thethin.net/citrixlist.cfm


**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************

For Archives, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link.

http://thethin.net/citrixlist.cfm

Other related posts: