The tech decided to lift the 12V line from the reg he replaced(the shorted three terminal IC650). When he lifted the output, the set would come up and could see a distorted OSD menu.I assume whatever took out IC650 12v reg also took out something down stream in the 12V line. Awaiting the manual... Phil Bader Phil Bader wrote: > > Sony KV-32FS10 TV.Was dead. Replaced the smps regulator IC650.Now push > power,powers on with a burst of HV,( no pix,sound or filament..) then > instantly shuts down.LED does a constant slow blink. Unplug the set and > hear a blast of audio. > Customer very antsy...help! > Helping a local shop here. > Phil Bader > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: philbad@xxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: philbad@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/