Hello, Try these..... OEM = ESM, PHILIPS, supplier http://www.jico.co.za/integrat.htm info@xxxxxxxxxx http://www.jico.co.za/contact.htm or http://www.donberg.ie/warehs/parts14.htm http://www.elmeco.cz/WWW.TXT Circuit diagram... http://www.qrz.ru/reference/micro2/pic/96.shtml http://www.qrz.ru/reference/micro2/pic/96.gif http://www.qrz.ru/reference/micro2/t2.shtml TDA1111 = Type , ±6...±15 = Unit ? 20,000 = P ??? ?? 4 = R? O?, 20...20 = F? HZ...?Hz, 20 = ICC0 mA, SIP1-11 = Housing, PHILIPS = Producer, Analogs http://fw.kaluga.ru/chips/chips3/t.htm www.burosch.de has free pinout programs...see below.... NF-power amplifier 20W pinouts 1 = substrat -Vcc 2 = * input negative 3 = * input positive 4 = frequency compensation 5 = not collected 6 = nicht benutzt (german?) 7 = boot strap 8 = * Speisung +Ucc 9 = * NF-Output 10 = * Speisung -Vcc 11 = * substrat -Vcc translate sites here... http://babel.altavista.com/sites/babelfish/tr tech-rep@xxxxxxxxxx -----Original Message----- From: Comune Marino <ragmandati@xxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Thursday, February 07, 2002 6:00 AM Subject: [TechAssist] tda1111sp > >Hello. >I need to substitude a Tda 1111 sp. >Do you know how to substitude it?. >Is out of stock from main sources because obslete. >Many thanks Alberto > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.