[TechAssist] Re: sylvania ssc191 shutsdowntape stuck
- From: John at Main TV <maintv@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 09 May 2002 16:21:00 -0600
I don't know what the fix is but I have a SSC190 (Sylvania)
manufactured in 2000 with the exact same symptoms. I actually had 2 of
the same model numbers in at the same time. I swapped the defl. boards
and the VCR mechanism and the symptoms did not change. I replaced the
mode switch but no help. So the problem is on the VCR board. The
problem reminds me of the Funai's a few years ago that had a weak LED
but I tried that and no help. Please let me know if you find something.
John.
Main TV
Longmont, Co. 80501
303 776 6955
maintv@xxxxxxxxxxxxx
repair1 wrote:
>sylvania ssc191aka funai:
>This unit will power up, instantly shutdown(b+ on hot goes to 119,hv comes
>up, immediately,goes to what I assume is stby mode 42v,ic602 comes up to
>4.97v then back down to 1.8, if you remove ac power,then restore it, unit
>will spin cylinder and eject tape, otherwise when you power up and turn unit
>on, only a small bump out of head cylinder, any help would be greatly
>appreciated.
>
>charles betzler
>Best Electronics
>repair1@xxxxxxxxxxxxx
>
>------------------------------------------
>To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here:
>http://www.tech-assist.org/secure/tip/
>
>
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
