[TechAssist] Re: sony vcr model # SLV-N50
- From: "DOCVIDEO" <DOCVIDEO@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 15 Nov 2001 22:07:15 -0800
Make sure the cassette is seating fully in FULL load lock position....wiper arm
assy
on cassette load assy could be damaged ..look close at heavy black spring's...
You did not say what you have done...?? Have you checked for dirty tape
path.....???
Cpastan motor bearings?? motor PCB for bad caps & traces.
MONTE MONCRIEF
BAKERSFIELD, CA.
DOCVIDEO@xxxxxxxxxx
----- Original Message -----
From: "Junior E Hurdle" <jselectronics@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, November 15, 2001 9:50 PM
Subject: [TechAssist] sony vcr model # SLV-N50
hi techs,
This VCR plays normal for about 2 to 3 minutes , after that the speed of the
tape
slowly
increases until the picture looks as if it is out o H sync and the audio is just
noise.
any one knows what causes this problem?
Thanks
Junior.
*****************************************
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
*****************************************
To UNSUBSCRIBE write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
*****************************************
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
*****************************************
To UNSUBSCRIBE write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
