Update... on the HV I only have 11K Barry scanlan engineering WEHT TV ---------- Original Message ---------------------------------- From: "Barry Scanlan" <scaninky@xxxxxxxxxxxxx> Reply-To: techassist@xxxxxxxxxxxxx Date: Sun, 13 Jun 2004 17:05:50 -0500 >I'm sorry if this message got sent twice... problem with this browser based >email. Anyway, I have a Sony KV-27S66 that was blinking the led 2 times....B+ >OCP. After searching I found C641 was loading down the 12v line.... down to >6v. I also found Q601 and Q603 were leaky in the PS section. I replaced those >also. The problem is, now with the new cap in place, I have audio but no video >and the led just blinks non stop. When you first turn on the tv the relay >kicks in and you can hear the HV and the audio comes up but the led just keeps >blinking and the picture does not come on. I have checked all the voltages and >they are fine except one....TP504, it should be 200v but I have 156 volts. I >have spent a lot of time on this and would appreciate a little help so I can >move on.... > >Thanks in advance, >Barry Scanlan >Engineering Dept. >WEHT-TV > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/