On the convergence board check C906 & C1711 (22uf/50) , C1716 & C1717 (47uf/25) C1745 (100uf/25). Also...try tweaking the Green H-width as this control affects the entire raster on all 3 guns. Jeff Stielau Shoreline Electronics Repair 125 Beech Tree Lane Westbrook, CT 06498 860-399-1861 860-664-3535 (fax) ----- Original Message ----- From: "howie" <howie@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, February 21, 2002 11:04 AM Subject: [TechAssist] sony kp46v15 > > set is drawn in on both sides and convergence is off.i changed both stk > converg.ics and checked b+ fuses.also soldered a load of bad connections > appreciate any help.thanks. > howie > moores tv serv. > falconer ny > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.