Charles, I`ll bet it`s not convergence even though it may look off, I had a 169PGB 3 months ago and it looked like bad convergence but turned out to be C4402 and Cr4402 located directly in front of the HOtransistor hth, Larry E. American TV & Electronics repair1 wrote: >This set is in customer's home(upstairs of course) from what customer >describes conv is off on sides about a third of way in on each side, cust >says crosshatch looks perfect. First of all, this hard to believe but I have >never had a single conv failure in the couple of hundred I have repaired, >secondly I am hesitant about just pulling light box, because I would not be >able to see most conv problems with my setup at shop, any help would be >greatly appreciated. > >charlers betzler >Best Electronics >repair1@xxxxxxxxxxxxx > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/